Abstract:Journal of Low Frequency Noise, Vibration and Active Control, Ahead of Print. The bridge pavement subjected to vehicle loads is the most vulnerable component in the highway bridge and overloaded vehicles can result in serious damage to the bridge pavement more easily. Therefore, it is necessary to consider the pavement in vehicle-bridge interaction (VBI) system. However, the bridge pavement is not considered in the traditional VBI system or the viscoelasticity of bridge pavement is ignored. In this study, a new vehicle-pavement-bridge interaction (VPBI) system is established. The viscoelastic asphalt pavement is simulated with the continuously and uniformly distributed spring-damper. The equivalent stiffness coefficient and equivalent damping coefficient of the pavement are determined through dynamic mechanical analysis (DMA) test and finite element method. The equations of motion for VPBI system can be derived using Lagrange equation and the modal superposition method. Then the crucial parameters such as displacement at mid-span of bridge, acceleration of vehicle body, tire contact force, and pavement deformation are obtained. The effects of vehicle velocity, bridge span, tire contact area, pavement stiffness coefficient, and pavement damping coefficient on VPBI responses are analyzed. The results show that (1) The pavement is compressive during vehicle passing bridge and its dynamic deformation fluctuates around initially static deformation of pavement. (2) Increasing the stiffness of pavement can rapidly reduce the deformation of pavement, while the pavement damping has the opposite effect. (3) The increase of bridge span can conduct exponentially growth of dynamic responses of VPBI system. The pavement deformation will increase by 7.9% if the bridge span is lengthened by 5 m. This study provides a reliability response analysis method for VPBI system.

Conflict between chainsaw rigid and vibration acceleration based on Conversion Bridge

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Simulation Vibration Analysis of Train and Railway Continuous Steel Truss Bridge

Modeling and Simulation of Torsional Vibration of the Compliant Sprocket in Balance Chain Drive Systems

Numerical analysis of vehicle-bridge coupling vibration concerning nonlinear stress-dependent damping

Dynamic Analysis and Optimization of Vehicle-Bridge Interaction System under Road Roughness and Time Variability of Element Interpolation Function

Field Measurement-Based Pedestrian-Induced Vibration Analysis and Comfort Evaluation of a Steel Truss Footbridge

Dynamic research on higih-pier & long-span continuous rigid frame bridge from overload vehicle

Modified transfer matrix method for vibration analysis of beam structures including branches and rigid bodies

Conflict Coordination Based on the Transformation Bridge for Collaborative Product Performance Optimization.

A Modified Bridge System method to characterize and decouple vehicle–bridge interaction

Study on optimization algorithm of tuned mass damper parameters to reduce vehicle-bridge coupled vibration

A vehicle-bridge interaction vibration model considering bridge deck pavement

A vehicle-bridge interaction model considering contact patch size and vehicle self-generated excitation – A theoretical study

Evaluation of the Dynamic Impact of a Passing Vehicle on a Bridge Deck Due to a Damaged Expansion Joint

Optimal Tuning of Inerter–Spring–Damper Vehicle Suspension for Mitigation of Bridge Response

Vibration Reduction in Beam Bridge under Moving Loads Using Nonlinear Smooth and Discontinuous Oscillator

Study on vibration reduction and base isolation of continuous bridges

Anti-Resonance Frequency Control by Span-Tuning Dynamic Vibration Absorber for Brush Cutter Vibration Reduction

Energy-based additional damping on bridges to account for vehicle-bridge interaction

Modeling and vibration suppression for overhead crane in planar space with nonlinear time-varying actuator faults and uncertain control directions