Abstract:Polymeric nanocomposites have gained attention over the past few decades for their enhanced thermal stability and degradation. However, the reactions involved in a polymer nanocomposite can vary significantly from system to system, making it necessary to investigate novel nanofillers in search for more effective materials. Nanocomposites comprised of alpha-zirconium phosphate (ZrP) nanosheets in poly (methyl methacrylate) (PMMA) were prepared with a wide range of nanoparticle loadings (0, 5, 10, and 30 wt.% ZrP in PMMA). The ZrP nanocomposites were characterized using UV-visible spectroscopy (UV-vis), x-ray diffraction (XRD), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Nanocomposites were well dispersed and optically transparent as shown by XRD and UV-vis. However in the UV region, transparent ZrP nanocomposites possessed excellent UV scattering properties, significantly reducing the transmittance of UV-light, while remaining transparent to the visual spectrum. Thermal stability studies using TGA and DTG showed the peak mass loss rate (PMLR) was reduced by 10% and simultaneously shifted to higher temperatures by 41 °C. Since the nanocomposites in this work cover such a large range of ZrP loadings, large amounts of high-temperature residuals were encountered after TGA studies, indicating that the high loading ZrP nanocomposites are largely noncombustible. In addition, DSC studies showed that ZrP content does affect the glass transition temperature, but not enough to limit the application in which ZrP nanocomposites could be used. These results point to ZrP nanocomposites being useful as polymer replacements, behaving like polymers until the event of a fire, in which case they are largely noncombustible.

Poly(methyl Methacrylate)/methacryl‐poss Nanocomposites with Excellent Thermal Properties

The Preparation and Characterization of PMMA/POSS-OH Hybrid Fiber

Thermal Degradation and Flammability of Nanocomposites Composed of Silica Cross-Linked to Poly(Methyl Methacrylate)

Effect of Trimethylolpropane Triacrylate Cross-Linkages on the Thermal Stability and Char Yield of Poly (methyl Methacrylate) Nanocomposites

Thermal Stability of Optically Transparent Alpha-Zirconium Phosphate/Poly(methyl Methacrylate) Nanocomposites with High Particle Loading

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Enhanced Thermal Properties and Flame Retardancy of a Novel Transparent Poly(methyl Methacrylate)-Based Hybrid Prepared by the Sol–Gel Method

Transparent Poly(methyl Methacrylate)/silica/zirconia Nanocomposites with Excellent Thermal Stabilities

The Intercalation of Poly(methyl Methacrylate)/aluminophosphate Nanocomposites and the Properties Improvement

Poly(methyl Methacrylate)/silica/titania Ternary Nanocomposites with Greatly Improved Thermal and Ultraviolet-Shielding Properties

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

A New Strategy for Simultaneously Improved Flame Retardancy, Thermal Properties, and Scratch Resistance of Transparent Poly(methyl Methacrylate)

PMMA–silica hybrid thin films with enhanced thermal properties prepared via a non-hydrolytic sol–gel process

Facile Fabrication of POSS-Modified MoS2/PMMA Nanocomposites with Enhanced Thermal, Mechanical and Optical Limiting Properties

A novel polymethyl methacrylate (PMMA) with excellent optical and thermal properties-bearing hydroxyadamamtyl substituent

Organic-inorganic hybrid strategy based on ternary copolymerization to prepare flame retardant poly(methyl methacrylate) with high performance

Preparation of a novel SiO2/PMMA nanocomposite with high transparency, thermal stability, and superior surface hardness via gamma‐radiation polymerization

Poly(Methyl Methacrylate)/Layered Zinc Sulfide Nanocomposites: Preparation, Characterization and the Improvements in Thermal Stability, Flame Retardant and Optical Properties

Hybrid Networks Based on Poly(Styrene-Co-Maleic Anhydride) and N-Phenylaminomethyl Poss

Poly(methyl Methacrylate)-Nanoribbon Nanocomposites with High Thermal Stability and Improvement in the Glass-Transition Temperature

Investigation of improved dielectric and thermal properties of ternary nanocomposite PMMA/MXene/ZnO fabricated by in‐situ bulk polymerization