Abstract:Porous surfaces often exhibit exceptional performance in liquid spreading and heat transfer, making them promising candidates for enhancing falling film heat transfer on solid surfaces. This paper delves into the flow and heat transfer characteristics occurring within falling films on horizontal tubes coated with a porous layer. To achieve this, a three-dimensional numerical model that couples the Volume of Fluid (VOF) method with porous media considerations was employed. The investigation comprehensively covers film spreading behavior, flow patterns, film velocity, film thickness, temperature distribution, and heat transfer coefficients, for both plain and porous tubes. Furthermore, we delve into the effects of key parameters, such as porosity, layer thickness, and material properties, on the overall heat transfer process. The results demonstrate the accuracy of our model in reproducing film thickness and heat transfer coefficients within falling films on horizontal porous tubes. When comparing plain tubes to porous ones, some key differences emerge. Specifically, the liquid film on porous tubes spreads more slowly, leading to increased film thickness and fewer occurrences of dry patches. Additionally, porous tubes result in lower film velocity and a more uniform temperature field compared to plain tubes. Interestingly, the findings reveal that smaller porosities yield thicker films and higher heat transfer coefficients, particularly when the porosity is below 0.4. Moreover, thicker porous layers result in thinner films, higher wetting ratios, and increased heat transfer coefficients. Among the materials we tested, aluminum and copper porous layers exhibit the highest heat transfer performance, while steel demonstrates the lowest.

Fluted Helix Channel Heat Transfer along A Vertical Tube

An Investigation of Flow Characteristics and Critical Heat Flux in Vertical Upward Round Tube

Numerical simulation of boiling behavior in vertical microchannels

Experimental and Numerical Studies of Liquid Flow and Heat Transfer in Microtubes

Single-phase flow and heat transfer in micro-channels

Spiral Coil Inserts for Heat Transfer Enhancement in a Parallel-Plate Channel

An Investigation of Falling Liquid Films on A Vertical Heated/Cooled Plate

Subcooled Flow Boiling Heat Transfer of Water in Circular Tubes with Twisted-Tape Inserts under High Heat Fluxes

Numerical simulation of flow and heat transfer in swirl microchannels

NUMERICAL ANALYSIS OF LAMINAR FLOW AND HEAT TRANSFER IN TWISTED ELLIPTIC TUBES

Numerical Studies of Simultaneously Developing Laminar Flow and Heat Transfer in Microtubes with Thick Wall and Constant Outside Wall Temperature

Investigation of Turbulent Flow and Heat Transfer in Periodic Wavy Channel of Internally Finned Tube with Blocked Core Tube

Numerical Study of Heat Transfer to Supercritical Water in an Inclined Tube

Experimental Study on Local Subcooled Flow Boiling Heat Transfer in A Vertical Mini-Gap Channel

Numerical Heat Transfer Analysis of Laminar Film Condensation on a Vertical Fluted Tube

A Comprehensive Numerical Study on the Subcooled Falling Film Heat Transfer on a Horizontal Smooth Tube

Numerical Simulation of Taylor Flow in Micro Circular Tubes

Heat Transfer Performance for A Falling-Film on Horizontal Flat Tubes

Numerical investigation of heat transfer and fluid flow characteristics inside a wavy channel

Numerical study of falling film flow and heat transfer on the horizontal tube with a porous coating layer

Numerical Investigation on the Performance of a Honeycomb-Shaped Channel