Abstract:Furfurylation is an effective and green method for wood or bamboo modification that can significantly improve its physical and mechanical properties and the resistance against biological deterioration and the attack of subterranean termites. To elucidate the effect of furfurylation on the physical and multiscale mechanical properties of bamboo, the conditions of the furfurylation process were modified to cause an independent variation of the physical and multiscale mechanical properties in differently-treated bamboo samples. This was achieved by impregnating bamboo samples with solutions containing 15%, 30%, 50%, or 70% furfuryl alcohol (FA) by either of the two impregnation processes, vacuum pressure (V-P) and soaking (S) impregnation, while applying different curing conditions (wet- or dry-curing). The physical properties we measured included the absorption rate, weight percent gain (WPG), swelling efficiency (SE), and anti-swelling efficiency (ASE); the macro-mechanical properties involved the modulus of rupture (MOR), the modulus of elasticity (MOE), parallel-to-grain compressive strength (CS), and tensile strength (TS); the micro-mechanical properties included the tensile strength of bamboo's vascular bundle and hardness and the indentation modulus of bamboo's fiber cell walls. Finally, the correlation between the different physical and mechanical properties of the modified bamboo samples was analyzed. The results indicate that V-P impregnation made bamboo more permissible for the penetration of FA, while wet-curing was more conducive to ensuring a high curing rate. The dimensional stability of the bamboo samples treated with a high FA concentration through V-P impregnation and of those furfurylated by the S-Wet process using either medium or high FA concentrations was significantly increased. However, the dimensional stability of the bamboo samples modified with either low or medium FA concentrations decreased in both dry and wet curing. In terms of mechanical strength, furfurylation had little effect on the macro- and micro-mechanical properties of bamboo and was slightly improved in comparison to untreated samples. The results also showed a positive correlation between the macro- and micro-mechanical strength of the modified bamboo samples and a significant negative correlation between the mechanical strength and ASE. In soaking impregnation, the WPG and ASE were positively correlated, while the WPG and CS were negatively correlated. Interestingly, the correlation between the mechanical properties and ASE was not significant. Finally, both V-P-Wet and S-Wet approaches can be recommended for bamboo furfurylation, the former being time-saving and having a high curing rate in FA resin while significantly improving the moisture absorption and mechanical strength of bamboo. The advantage of the latter process is simplicity, a high utilization rate of FA, and a significant improvement in the dimensional stability of bamboo.

Analysis of Bamboo CMP Pretreated with White-rot Fungi by XPS and AFM

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers

Role of surface treatment on water absorption of poly(vinyl chloride) composites reinforced by Phyllostachys pubescens particles

The Influence of Impregnation Methods and Curing Conditions on the Physical and Multiscale Mechanical Properties of Furfurylated Bamboo

Analysis of masson pine CTMP with XPS and AFM

Structural Change of White Powdery Bamboo Litgnin During APMP Process

Effect of Pretreatments on the Enzymatic Hydrolysis of High-Yield Bamboo Chemo-Mechanical Pulp by Changing the Surface Lignin Content

Bio-Modification of Eucalyptus Chemithermo-Mechanical Pulp with Different White-Rot Fungi

SEM-EDS Analysis of Fiber Surface of Sulfonated Chemimechanical Pulps

The Effect of Chemical Oxidation Pretreatment on the Preparation of Microfibrillated Cellulose (MFC)

Bio-Modification Of Eucalyptus Ctmp Pulp With Different White-Rot Fungi

Study On Mechanical Pulp'S Fiber Surface Properties Using Afm And Xps

The Delignification Effects of White-Rot Fungal Pretreatment on Thermal Characteristics of Moso Bamboo.

Bio-modification of Eucalyptus Chemithermomechanical Pulp

Effect of Enzyme Pretreatment on Surface Chemical Components of Bambusa chungii SCMP Fiber

Effect Of Xylanase On Fiber Surface Morphology And Composites In Bio-Ctmp Refining Process

Study on the Characterization of Physical, Mechanical, and Mildew Resistance Properties of Enzymatically Treated Bamboo Fiber-Reinforced Polypropylene Composites

The Chemical Composition of Bamboo after Heat Pretreatment with Fourier Infrared Spectrum Analysis

Enhanced Production of Sugars and UV-shielded Lignin/pan Fiber Mats from Chemi-Mechanical Pulps

Effect of Enzyme Pretreatment on the Properties of Bamboo(Bambusa Chung Ⅱ)SCMP Bleached by H_2O_2

Analysis of Eucalyptus CTMP by XPS and SEM