Abstract:CO2 conversion into fuels and high value-added chemical feedstocks, such as methane, has gained novel interest as a crucial process for further manufacturing multi-carbon products. Methane, CH4, becomes a promising alternative for environmental and energy supply issues. Nickel-based catalysts were found to be very active and selective for CH4 production. The use of promoter and support material to develop high activity, high selectivity, and durable catalysts for CO2 methanation at low temperature is a challenge. Gadolinium-Doped Ceria (GDC) has been known as material for Solid Oxide Fuel Cell (SOFC) and Solid Oxide Electrolysis Cell (SOEC) due to higher ionic conductivity and lower operating temperatures. However, few researches have been done regarding to CO2 methanation over GDC as catalyst support so far. In this present work, CO2 methanation was investigated over bimetallic Ni-Fe catalyst supported by GDC. The results showed that CH4 production rate by using Ni-Fe/GDC catalyst was higher than that of GDC at all reaction temperatures carried on. Ni-Fe/GDC showed remarkable CH4 production rate as of 17.73 mmol.gcat−1.h−1 at 280 °C. No catalytic activity was produced by GDC catalyst only. The highest CO2 conversion (46.50%) was observed at 280 °C, with almost 100% selectivity to CH4. The turnover frequency (TOF) value of Ni-Fe/GDC (4529.32 h−1) was the highest than that of Ni and common CO2 methanation catalyst, Ni/Al2O3 catalysts at 280 °C, further displaying the outstanding low-temperature catalytic activity. Copyright © 2024 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Selective Catalytic Methanation of CO in Hydrogen-Rich Gas with a Metal Foam Microreactor

RuCo/ZrO2 Tandem Catalysts with Photothermal Confinement Effect for Enhanced CO2 Methanation.

RuNi/TiZr-MMO Catalysts Derived from Zr-Modified NiTi-LDH for CO-Selective Methanation

CO2 Methanation over Nickel-Based Catalysts Supported on MCM-41 with in Situ Doping of Zirconium

Large-pore Mesoporous RuNi-doped TiO2–Al2O3 Nanocomposites for Highly Efficient Selective CO Methanation in Hydrogen-Rich Reformate Gases

Ru/Ir Nanojunctions Supported on CNTs As Active and Ultrastable Catalysts for CO Preferential Oxidation Toward Hydrogen Purification

CO Removal Via Selective Methanation over the Catalysts Ni/ZrO2 Prepared with Reduction by the Wet H-2-rich Gas

Ni‐Al2O3/Ni‐foam catalyst with enhanced heat transfer for hydrogenation of CO2 to methane

Highly Stable and Selective Ni/ZrO2 Nanofiber Catalysts for Efficient CO2 Methanation

Plasma-catalytic CO2 methanation over Ni supported on MCM-41 catalysts: Effect of metal dispersion and process optimization

Preparation adjacent Ni-Co bimetallic nano catalyst for dry reforming of methane

Efficient and Stable Ni/ZSM-5@MCM-41 Catalyst for CO 2 Methanation

Bimetallic Ni-Fe Supported by Gadolinium Doped Ceria (GDC) Catalyst for CO2 Methanation

Nanostructured Ru-Co@SiO2: Highly Efficient Yet Durable for CO2 Reforming of Methane with a Desirable H2/CO Ratio

Hydrogenation of CO to methane over mesoporous nickel-iron-alumina xerogel nano-catalysts

Facile use of coal combustion fly ash (CCFA) as Ni-Re bimetallic catalyst support for high-performance CO2 methanation

Combined Catalytic Partial Oxidation and CO2 Reforming of Methane over ZrO2-modified Ni/SiO2 Catalysts Using Fluidized-Bed Reactor

Efficient Solar‐Driven CO2 Methanation and Hydrogen Storage Over Nickel Catalyst Derived from Metal–Organic Frameworks with Rich Oxygen Vacancies

Hollow structured Cu@ZrO2 derived from Zr-MOF for selective hydrogenation of CO2 to methanol

Ni-CaZrO3 with Perovskite Phase Loaded on ZrO2 for CO2 Methanation

Highly stable CuFe1.2Al.8O4 catalyst with low CO selectivity for hydrogen production in HT‐PEMFCs application