Abstract:Converting CO2 into methane is considered a promising and economically viable technology for global transportation and utilization of this greenhouse gas. This study involves the preparation of a Ni-CZ (CeO2-ZrO2)/ATP (attapulgite) catalyst through the co-precipitation and impregnation methods. XRD, SEM, TEM, N2 absorption-desorption isotherms, XPS, H2-TPR, CO2-TPD, TG/DSC, and Raman were adapted to characterize the obtained samples. Real-time GC was used to measure the catalytic performances and to intensively study the impact of Ni loading content and ATP to CZ ratio on the catalytic performance of the products. DRIFTs was used to monitor the interstitial radicals in the catalytic reactions and to deduce the catalytic mechanisms. The results indicate that the composite catalytic matrix composed of CZ assembled on ATP demonstrated higher CO2 methanation stability and better carbon deposition resistance ability than the single CZ or ATP as the carrier, which should be attributed to the improved specific surface area and pore volume of the ATP assembled matrix and the enhanced dispersibility of the CZ and Ni species. The adoption of CZ solid solutions improves the oxygen storage capability of the catalyst, thereby providing continued mobile O2− in the matrix and accelerating the molecular exchange rate in the catalytic reactions. The ideal loading quantity of nickel contents on the CZA matrix is 15%, as the CO2 conversion decreases at elevated temperatures when the Ni loading content reaches 20%. Among the tested samples, the 15Ni-0.8CZA sample showed the best catalytic performance of 75% CO2 conversion and 100% CH4 selectivity at 400 °C. After 50 h of stability tests, the CO2 conversion rate still remained 70.84%, and the CH4 selectivity obtained 97.46%. No obvious coke was detected according to the Raman spectra of the used catalyst. The in situ DRIFTS experiment showed that formate is the main intermediate of the CO2 hydrogenation reaction on the 15Ni-0.8CZA catalyst.

Ni-CaZrO3 with Perovskite Phase Loaded on ZrO2 for CO2 Methanation

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

Enhanced low-temperature CO2 methanation performance of Ni/ZrO2 catalysts via a phase engineering strategy

CO2 Methanation over Nickel-Based Catalysts Supported on MCM-41 with in Situ Doping of Zirconium

Highly Stable and Selective Ni/ZrO2 Nanofiber Catalysts for Efficient CO2 Methanation

Efficient and Stable Ni/ZSM-5@MCM-41 Catalyst for CO 2 Methanation

Ni-based mesoporous Ce0.8Zr0.2O2 catalyst with enhanced low-temperature performance for CO2 methanation

Ni-based catalysts derived from Ni-Zr-Al ternary hydrotalcites show outstanding catalytic properties for low-temperature CO<sub>2</sub> methanation

Constructing the highly efficient Ni/ZrO2/SiO2 catalyst by a combustion-impregnation method for low-temperature CO2 methanation

Enhanced low-temperature performance of CO2 methanation over mesoporous Ni/Al2O3-ZrO2 catalysts

CO<sub>2</sub> Methanation over Rare Earth Doped Ni-Based Mesoporous Ce<sub>0.8</sub>Zr<sub>0.2</sub>O<sub>2</sub> with Enhanced Low-Temperature Activity

Effective CO2 Thermocatalytic Hydrogenation with High Coke Resistance on Ni-CZ/Attapulgite Composite

Insights into the Zn Promoter for Improvement of Ni/SiO 2 Catalysts Prepared by the Ammonia Evaporation Method toward CO 2 Methanation

An Efficient Ni-Mg/HNTs Catalyst for CO2 Methanation Prepared by Sol-Gel Method Assisted with Citric Acid

Mesoporous Ce-Zr Solid Solutions Supported Ni-based Catalysts for Low-Temperature CO2 Methanation by Tuning the Reaction Intermediates

Insights on the Highly Stable and Coke-Resistant Nickel/Zirconia Nanocatalyst for the Methanation of Carbon Dioxide

Balance effect between Ni dispersion and hydrophobicity in CO 2 methanation over Ni/ZSM-5

Highly Stable and Selective Ni/ZrO 2 Nanofiber Catalysts for Efficient CO 2 Methanation

CO2 methanation on Ni-Ce0.8M0.2O2 (M=Zr, Sn or Ti) catalyst: Suppression of CO via formation of bridging carbonyls on nickel

RuNi/TiZr-MMO Catalysts Derived from Zr-Modified NiTi-LDH for CO-Selective Methanation

Well-Designed morphology regulated ZIF-67 derived 0D/1D Co3O4@TiO2 NWs integrated with in-situ grown Ni/Co-Active metals for Low-Temperature driven CO2 methanation