Abstract:The separation of the gas and liquid in the gas-liquid cyclone separator is achieved through the swirling flow. The liquid film flow characteristics and the dynamics of droplets impacting the liquid film are very important for the separation performance, but these phenomena have not been well understood in the swirling flow. In this work, an experiment was conducted to investigate the liquid film flow and droplet impingement in the annular channel of the gas-liquid cyclone separator. Three regions of the annular channel could be divided based on the film flow patterns, which were the inlet region, the annular region, and the outlet region; and four typical droplet impact outcomes could be observed, which were splashing, coalescence, bouncing, and jet breakup. According to the characteristics of the liquid film and the outcome of droplet liquid film impingement, if the droplet splashing in the inlet region could be weakened and the length of the annular region was lengthened, it would be beneficial for gas-liquid separation. The impact outcomes were shown to undergo a transition from bouncing to coalescence as the droplet Weber number increased. Droplet coalescence was affected by the disturbance of gas flow and the evenness of the liquid film, so when the superficial velocity of the gas flow was fixed, the transition boundary was constant whatever the liquid volume fraction in the channel, and when the Reynolds number of the gas flow increased, the transition boundary of droplet Weber number increased first and then decreased. This work may provide a basis for a comprehensive understanding of the liquid film flow pattern and droplet behavior in the cyclone separator, and the results have the potential to be applied in other multiphase studies.

Experimental Study of Pressure Drop of Single Phase in Cylindrical Cyclone

Numerical Simulation of the Effect of a Reducing Pressure Drop Stick in a Spiral Cyclone

Numerical Study on Oil and Water Two-Phase Flow in A Cylindrical Cyclone

Oil/Water Separation in a Liquid-Liquid Cylindrical Cyclone

Separation performance of hydrocyclone oil removal device influenced by oil droplet trajectory and oil drop characteristics

Research on the Two-Phase Flow and Separation Mechanism in the Oil-Gas Cyclone Separator

Experimental study on the separation performance of a novel oil–gas cyclone separator

Performance experiments and pressure drop prediction modelling of an energy-saving cyclone separator

Oil-water separation in a cylindrical cyclone with vortex finder

Experimental Investigation of Oil Film Flow and Droplets Behavior in the Annular Channel of a Cyclone Separator

Study on the floatation mechanism and floatation performance for the floatation cyclone of natural inlet air

Design of Downhloe Oil-Water Cyclone Separator and the Study of Laboratory Experiment

Computational fluid dynamics and experimental investigation of inlet flow rate effects on separation performance of desanding hydrocyclone

Experimental investigation on separation characteristics of axial cyclone separator

Experimental Research on Square Cyclone

An experimental investigation of the oil film distribution in an oil–gas cyclone separator

Research on the Flow Field in the Exit Tube and the Mechanism of Pressure Drop Reduction in a Cyclone Separator

Numerical analysis of a novel cascading gas-liquid cyclone separator

Numerical study of gas-solid flow in a radial-inlet structure cyclone separator

Numerical Study of Gas-Solid Flow in a Square Cyclone Separator with Different Vortex Finders

Investigation on the character of 3D flow field and pressure drop