Abstract:A comprehensive CFD–DEM numerical model has been developed to simulate the biomass gasification process in a fluidized bed reactor. The methodology is based on an Eulerian–Lagrangian concept, which uses an Eulerian method for gas phase and a discrete element method (DEM) for particle phase. Each particle is individually tracked and associated with multiple physical (size, density, composition, and temperature) and thermo-chemical (reactive or inert) properties. Particle collisions, hydrodynamics of dense gas-particle flow in fluidized beds, turbulence, heat and mass transfer, radiation, particle shrinkage, pyrolysis, and homogeneous and heterogeneous chemical reactions are all considered during biomass gasification with steam. A sensitivity analysis is performed to test the integrated model׳s response to variations in three different operating parameters (reactor temperature, steam/biomass mass ratio, and biomass injection position). Simulation results are analyzed both qualitatively and quantitatively in terms of particle flow pattern, particle mixing and entrainment, bed pressure drop, product gas composition, and carbon conversion. Results show that higher temperatures are favorable for the products in endothermic reactions (e.g. H2 and CO). With the increase of steam/biomass mass ratio, H2 and CO2 concentrations increase while CO concentration decreases. The carbon conversion decreases as the height of injection point increases owing to both an increase of solid entrainment and a decrease of particle residence time and particle temperature. Meanwhile, the calculated results compare well with the experimental data available in the literature. This indicates that the proposed CFD–DEM model and simulations are successful and it can play an important role in the multi-scale modeling of biomass gasification or combustion in fluidized bed reactor.

3D Computational Fluid Dynamics Simulation of Natural Coke Steam Gasification in General and Improved Fluidized Beds

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

CFD Simulation of the Steam Gasification of Millimeter-Sized Char Particle Using Thermally Thick Treatment

CFD Modelling of the Co-Gasification of Biomass and Coal Particles in Fluidised Beds

Numerical simulation of gasification characteristics in a circulating fluidized bed biomass gasifiers

Advanced Modeling Approaches for CFD Simulations of Coal Combustion and Gasification

CFD simulation of air-blown coal gasification in a fluidized bed reactor with continuous feedstock

3D numerical simulation of Texaco gasifier using assumed PDF model

CFD–DEM simulation of biomass gasification with steam in a fluidized bed reactor

Numerical Analysis for Coal Gasification Performance in a Lab-Scale Gasifier: Effects of the Wall Temperature and Oxygen/Coal Ratio

Three-dimensional simulation of biomass gasification in a full-loop pilot-scale dual fluidized bed with complex geometric structure

Three-dimensional Numerical Simulation of Entrained-Flow Gasifier and Influence of Coal Distribution at the Inlet

Coal Char Gasification on A Circulating Fluidized Bed for Hydrogen Generation: Experiments and Simulation

Numerical Analysis of Biomass Gasification in a Fluidized Bed Reactor Using a Computational Fluid Dynamics Model Integrated with Reduced-Order Reaction Kinetics

Simulation of Biomass-Steam Gasification in Fluidized Bed Reactors: Model Setup, Comparisons and Preliminary Predictions

Kinetic Model and CFD Simulation for an Entrained Flow Coal Hydrogasifier and Influence of Structural Parameters

Three-Dimensional Simulation for an Entrained Flow Coal Slurry Gasifier

CFD simulation of a fluidized bed reactor for biomass chemical looping gasification with continuous feedstock

Three-dimensional full-loop simulation of biomass gasification in dual fluidized bed

Numerical study of biomass gasification in a 0.3 MWth full-loop circulating fluidized bed gasifier

The Numerical Simulation of Petroleum-Coke Coal Water Slurry Gasification Process in a New-Type Coal Water Slurry Gasifier