Abstract:A low-cost and easily-accessible approach based on adsorption of small aromatic hydrocarbons (SAHs) was developed to synthesize graphene on Cu powders, which could supply raw material for powder metallurgy (PM) fabrication of graphene/Cu composites. Two common SAHs, naphthalene and α-naphthol, were chosen as the carbon precursors. Compared with naphthalene, it was found that the hydroxyl group in α-naphthol could be chemically adsorbed on Cu powders, which could not only be effective in preventing Cu powders from agglomerating together at high temperature but also promote the growth of high-quality graphene. Therefore, α-naphthol-derived graphene on Cu powders were chosen to fabricate graphene/Cu composites by spark plasma sintering and hot-rolling. The composites exhibited a microstructure with extremely homogeneous dispersion of graphene, exceptional high strength and simultaneously similar electrical conductivity compared with that of the matrix. Cu–O–C bond was found and could improve the interfacial bonding between graphene and matrix. Experimental and theoretical calculation results revealed that the load transfer, grain refinement and thermal mismatch mechanism provided by graphene were the main strengthening mechanism in the composite. This synthetic procedure is quite scalable for industrial use to fabricate graphene/Cu composites with high performance.

Graphene-Cuo Nanocomposite

Preparation and Electrochemical Performance of a CuO/graphene Composite

High-quality graphene directly grown on Cu nanoparticles for Cu-graphene nanocomposites

Synthesis and Characterization of Graphene/Cu 2 SnS 3 Quantum Dots Composites

Fabrication of a Graphene–cuprous Oxide Composite

Synthesis and Characterization of Graphene/Cu<sub>2</sub>SnS<sub>3</sub> Quantum Dots Composites

Direct synthesis of high-quality graphene on Cu powders from adsorption of small aromatic hydrocarbons: A route to high strength and electrical conductivity for graphene/Cu composite

Synthesis of Single-layer Graphene-nanocomposite directly from graphene oxide

Synthesis and Characterization of ZrO<sub>2</sub>/Graphene Nanocomposite Materials

Synthesis and Physical Properties of Graphene Nanosheets Reinforced Copper Composites

Synthesis of Cu2O/CNTs composite by polyol method

Synthesis of Carbon Nanotube-Cuxo(X=8, 64) Nanocrystal Composites

Preparation and antibacterial activity of graphene oxide/cuprous oxide/zinc oxide nanocomposite

Graphene Quantum Dots Coating Enhances Lithium Storage Performance of CuO Nanowires

Graphene Decorated with ZnO Nanocrystals with Improved Electrochemical Properties Prepared by a Facile in Situ Hydrothermal Route

Synthesis of Graphene Together with Undesired Cuxo Nanodots on Copper Foils by Low-Pressure Chemical Vapor Deposition

Synthesis of Cuo Nano- and Micro-Structures and Their Raman Spectroscopic Studies

Facile Synthesis and Application of Ag-chemically Converted Graphene Nanocomposite

One-pot Hydrothermal Synthesis of Graphene–ruo2–tio2 Nanocomposites

CuO/graphene composite as anode materials for lithium-ion batteries

Synthesis of Single-Layer Graphene-Quantum Dots Nanocomposite Directly from Graphene Oxide