Abstract:In this work, the effect of graphene and nitrogen doping on the performance of dye-sensitized solar cells of pure TiO2 was studied. Pure and N-doped TiO2 nanoparticles were synthesized using a hydrothermal method, while graphene was prepared through the reduction of graphene oxide. The materials were characterized using x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FT-IR), Raman, Brunauer–Emmett–Teller surface area analysis (BET) and ultraviolet-visible (UV-Vis) diffusion reflectance spectroscopy. Nitrogen dopant concentration varied from 0 at.% to 1.57 at.%. The results confirmed that all N-doped samples exhibited pure anatase phase with an average diameter in the range of 7–12 nm. The pore volume and BET surface area increased with the amount of nitrogen in TiO2. XPS investigation displayed an N1s peak around 397 eV, which suggested N-Ti-O structure in the TiO2 matrix. Moreover, optical measurements showed that the optical absorption edge of N-doped TiO2 exhibited a significant shift from ultraviolet to visible light region in comparison with pure TiO2. Dye-sensitized solar cells (DSSCs) were fabricated using N719 dye and various TiO2 based photoanodes. The photoanode of N-doped TiO2 modified with graphene showed the highest energy-conversion efficiency of 6.3%, while the efficiencies of pure and N-doped TiO2 cells are 0.41% and 1.21%, respectively. The improvement in conversion efficiency of graphene-based DSSC was attributed to the formed electron bridges between TiO2 and fluorine-doped tin oxide (FTO), which led to a reduction in the recombination rate of electron-hole pairs and an increase in the rate of electron transport.

Enhancing the photoelectric conversion of dye-sensitized solar cell via nitrogen-doped nanocrystalline titania electrode.

Photo-assisted Deposition of Ag Nanoparticles on Branched TiO2 Nanorod Arrays for Dye-Sensitized Solar Cells with Enhanced Efficiency

Construction of Efficient Photoanodes for Dye Sensitized Solar Cells: TiO2 Films with a Gradient Content of Graphene

Enhance the performance of dye-sensitized solar cells by co-sensitization of 2,6-bis(iminoalkyl)pyridine and N719

Enhanced Performance of Dye-Sensitized Solar Cells with Layered Structure Graphitic Carbon Nitride and Reduced Graphene Oxide Modified TiO2 Photoanodes

Enhanced photovoltaic performance of dye-sensitized solar cells using a new photoelectrode material: upconversion YbF3-Ho/TiO2 nanoheterostructures

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Improving Photovoltaic Performance of Dye-Sensitized Solar Cell by Modification of Photoanode With g-C 3 N 4 /TiO 2 Nanofibers

Doped Titania Nanocrystalline Photoanodes for Efficiency Improvement of Dye-Sensitized Solar Cells

TiO 2 Nanofibers Doped With NiS as Photoanode to Improve the Photovoltaic Conversion Efficiency of Dye-Sensitized Solar Cells

Enhancement of photoelectric conversion efficiency with sulfur-doped g-C3N4/TiO2 nanoparticles composites in dye-sensitized solar cells

Open-circuit voltage improvement by using TiO2 nanotubes as a working electrode of dye-sensitized solar cell

Design and Preparation of Nano-Electrodes for Dye-Sensitized Solar Cell

Improvement of the photoelectric dye sensitized solar cell performance using Fe/S–TiO2 nanoparticles as photoanode electrode

Dye-Sensitized Solar Cells Based on an N-Doped TiO2 and TiO2-Graphene Composite Electrode

TiO2 nanotube based dye-sensitized photoanode

Bifunctional Single-Crystalline Rutile Nanorod Decorated Heterostructural Photoanodes For Efficient Dye-Sensitized Solar Cells

DSSCs Using a Nanoparticle/Nanorod Composite TiO<sub>2</sub> Film As a Photoanode

Photovoltaic Performance of Dye-Sensitized Solar Cell by Modification of Photoanode With PbTiO 3 –ZnFe 2 O 4 /TiO 2 Nanofibers

Enhanced Visible Light Photoelectrochemical Performances with Nitrogen Doped TiO_2 Nanowire Arrays

Enhanced photoelectrochemical performance by synthesizing CdS decorated reduced TiO2 nanotube arrays