Abstract:Pure iron as a potential bioresorbable material for bioresorbable coronary scaffold has major disadvantages of slow corrosion and bioresorption. However, so far, there are neither quantitative data of long-term in vivo corrosion nor direct experimental evidence for bioresorption of pure iron and its alloys, which are fundamental and vital for developing novel Fe-based alloys overcoming the intrinsic drawbacks of pure iron. This work systemically investigated scaffold performance, long-term in vivo corrosion behavior and biocompatibility of a nitrided iron coronary scaffold and explored its bioresorption mechanism. It was found that the 70 mu m Fe-based scaffold was superior to a state of the art Co-Cr alloy stent (Xience Prime (TM)) in terms of crossing profile, recoil and radial strength. Mass loss was 76.0 +/- 8.5 wt% for the nitrided iron scaffold and 44.2 +/- 11.4 wt% for the pure iron scaffold after 36 months implantation in rabbit abdominal aorta (p < 0.05). The Fe-based scaffold showed good long-term biocompatibility in both rabbit and porcine model. Its insoluble corrosion products were demonstrated biosafe and could be cleared away by macrophages from in situ to adventitia to be indiscernible by Micro Computed Tomography and probably finally enter the lymphatics and travel to lymph nodes after 53 months implantion in porcine coronary artery. The results indicate that the nitrided iron scaffold with further improvements shall be promising for coronary application.Statement of SignificancePure iron as a potential bioresorbable material has major disadvantages of slow corrosion and bioresorption. However, so far, there are neither quantitative data of long-term in vivo corrosion nor direct experimental evidence for bioresorption of pure iron and its alloys. Only this work systemically investigated long-term in vivo corrosion behavior and biocompatibility of a nitrided iron coronary scaffold up to 53 months after implantation and explored its bioresorption mechanism. These are fundamental and vital for developing novel Fe-based alloys overcoming the intrinsic drawbacks of pure iron. Novel testing and section-preparing methods were also provided in this work to facilitate future research and development of novel Fe-based alloy scaffolds. (C) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

In vitro corrosion, cytotoxicity and hemocompatibility of bulk nanocrystalline pure iron

Electrochemical Corrosion Behavior of Bulk Nanocrystalline Copper in Nitric Acid Solution

Electrochemical corrosion behavior of nanocrystalline copper bulk

Surface chemistry of bulk nanocrystalline pure iron and electrochemistry study in gas-flow physiological saline

In Vitro Corrosion and Haemocompatibility of Bulk Nanocrystalline 304 Stainless Steel by Severe Rolling

Biocorrosion Properties and Blood and Cell Compatibility of Pure Iron As a Biodegradable Biomaterial

Effects of Different Substrates on Microstructures and Mechanical Properties of a Bulk Nanocrystalline Structure Pure Iron Prepared by Aluminothermic Reaction Casting

Cytotoxicity and Cellular Uptake of Iron Nanowires

Corrosion fatigue behavior of nanoparticle modified iron processed by electron powder bed fusion

Comparative Study on Corrosion Resistance and in Vitro Biocompatibility of Bulk Nanocrystalline and Microcrystalline Biomedical 304 Stainless Steel.

Comparative study on corrosion resistance and in vitro biocompatibility of bulk nanocrystalline and microcrystalline biomedical 304 stainless steel

In Vitro Studies on Silver Implanted Pure Iron by Metal Vapor Vacuum Arc Technique.

Compressive, Tensile, And Dynamic Behavior Of Nanophase Iron

Cytotoxicity and Its Test Methodology for a Bioabsorbable Nitrided Iron Stent

Effect of grain sizes on mechanical properties and biodegradation behavior of pure iron for cardiovascular stent application

Biodegradable Nanostructures: Degradation Process and Biocompatibility of Iron Oxide Nanostructured Arrays

Electrochemical Corrosion Behavior of Bulk Nanostructured Industrial Pure Iron in Sulphuric Acid Solution

Long-Term in Vivo Corrosion Behavior, Biocompatibility and Bioresorption Mechanism of A Bioresorbable Nitrided Iron Scaffold

In vitro biocompatibility assessment of functionalized magnetite nanoparticles: biological and cytotoxicological effects.

In Vitro Corrosion Behavior and Biocompatibility of Nanostructured Ti6Al4V.

Accelerated Degradation Behavior and Cytocompatibility of Pure Iron Treated with Sandblasting.