Abstract:The oxides of strontium, lanthanum, and zinc (SrO, La2O3 and ZnO) were synthesized with various loadings over γ‐Al2O3 by wet impregnation method. The use of supercritical methanol resulted in higher biodiesel yields in shorter reaction times compared to conventional methods. Furthermore, heterogeneous catalysts have led to a significant increase in biodiesel yield and showed high durability under supercritical conditions. Among the catalysts, ZnO/γ‐Al2O3 was found to be the most convenient option based on cost considerations. The rationale for this study lies in the investigation of the transesterification of crude Jatropha curcas oil into biodiesel using advanced heterogeneous catalysts under supercritical methanol conditions. The oxides of strontium, lanthanum, and zinc (SrO, La2O3, and ZnO) were synthesized with varying loadings (2 wt %, 6 wt %, and 10 wt %) on γ‐Al2O3 using the wet impregnation method followed by calcination at 900 °C. To gain a comprehensive understanding of the prepared catalysts, multiple analytical techniques were employed, including scanning electron microscopy (SEM) with energy‐dispersive X‐ray spectroscopy (EDS), Brunauer‐Emmett‐Teller (BET) surface area analysis, X‐ray diffraction (XRD), and Fourier transform infrared (FT‐IR) spectroscopy. The performance of the catalysts was assessed through the measurement of biodiesel yield, where the SrO/γ‐Al2O3, ZnO/γ‐Al2O3, and La2O3/γ‐Al2O3 systems produced yields of 97.54 %, 97.49 %, and 97.36 %, respectively, under identical reaction conditions of a 1 : 40 oil to methanol molar ratio, 10 wt % catalyst loading amount, 300 °C reaction temperature, 90 bar reaction pressure, and a reaction time of 3 min. Despite a minimal decrease of 0.05 %, zinc oxide catalysts remain highly attractive due to their favorable price position compared to strontium. Additionally, the catalyst can be reused up to 12 times with minimal loss in biodiesel yield (~2 %).

Biodiesel Preparation Using Jatropha Oil by Ultrasonic and Nanometer Catalysts

Optimization and kinetic study of biodiesel production from Jatropha curcas oil in supercritical methanol environment using ZnO/γ-Al2O3 catalyst

Preparation of Biodiesel Catalyzed by Solid Super Base of Calcium Oxide and Its Refining Process

Investigation of Jatropha Oil Transesterification into Methyl Esters under Supercritical Methanol Environment using Advanced Heterogeneous Catalysts

Preparation, application, and optimization of Zn/Al complex oxides for biodiesel production under sub-critical conditions.

Hydrocracking of Bio-Alkanes over Pt/Al-MCM-41 Mesoporous Molecular Sieves for Bio-Jet Fuel Production

Bilateral Hip Arthroplasties following Cardiac Transplantation

Comparison of biodiesel production using a novel porous Zn/Al/Co complex oxide prepared from different methods: Physicochemical properties, reaction kinetic and thermodynamic studies

Biodiesel production from jatropha seeds with bead-type heterogeneous catalyst

Preparation of biodiesel by transesterification of castor oil catalyzed by flaky halloysite supported ZnO/SnO 2 heterojunction photocatalyst

Bifunctional acid-activated montmorillonite catalyzed biodiesel production from non-food oil: Characterization, optimization, kinetic and thermodynamic studies

Transesterification of the Crude Jatropha Curcas L. Oil Catalyzed by Micro‐naoh in Supercritical and Subcritical Methanol

Megakaryocytic ploidy in myelodysplastic syndromes.

Transesterification of Jatropha Oil to Biodiesel by Using Catalyst Containing Ca(C3H7O3)2 As a Solid Base Catalyst

Efficient simultaneous esterification/transesterification of non-edible Jatropha oil for biodiesel fuel production by template-free synthesized nanoporous titanosilicates

Calcium Oxide Supported on Coal Fly Ash (CaO/CFA) as an Efficient Catalyst for Biodiesel Production from Jatropha curcas Oil

Glycerol Esterification of Free Fatty Acids Catalyzed by Zinc Glycerolate for Biodiesel Production from Acidified Palm Oil: Optimization, Kinetic Study, and Process Evaluation

Metal-Organic Framework-Derived Solid Catalyst for Biodiesel Production from Jatropha curcas Oil: Kinetic Study and Process Optimization Using Response Surface Methodology

Impact of Pt/Al-MCM-41 Catalyst Metal/Acid Ratio in Hydrocracking of Bio-Alkanes for Bio-Jet Fuel Production

Solid Acid Catalyst WO3-ZrO2 for the Catalytic Deoxygenation of Jatropha Oil for the Preparation of Aviation Paraffin

Refinery Operation Optimization for Purification of Biodiesel Product by Alkaline-catalyzed Process