Abstract:Triglycerides from animal fats and vegetable oils are used as the sustainable feedstocks for the generation of biofuels. Tung oil, rubber seed oil, Jatropha curcas oil, waste cooking oil, and waste acidified oil were selected as the triglyceride feedstocks for the production of drop-in biofuels by a catalytic cracking process. The one-step process was carried out in a laboratory-scale fixed-bed reactor using a SO42–/TiO2-ZrO2 catalyst. The catalyst exhibited an excellent performance of cracking, deoxygenation, and aromatization reactions. Moreover, it could be repeatedly used for more than 15 times without an obvious deactivation. The catalytic cracking process resulted in a high yield (65–72%) of the biofuel, which showed a low acid value (3.78 mg KOH/g) and low oxygen content (1.49%). The biofuels were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis, proton nuclear magnetic resonance, and gas chromatography–mass spectrometry, suggesting that the dominant components of the biofuels are hydrocarbons in the range of C6–C26, including 17% alkanes, 56% olefins, and 22% monocyclic aromatics. These bio-hydrocarbon fuels in the crude form are chemically identical or near-identical to petroleum-based fuels, which have an attractive fraction distribution (>32% bio-gasoline, >50% green diesel, and <11% heavy fraction) and can be fractionated and used in different formulations depending on the types of desired fuels.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.0c02204?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.0c02204</a>.Additional validation table showing the properties of the STZ catalysts; additional validation figures showing FT-IR spectra of five inedible oils, TGA and DTG curves of OLPs, 1H NMR spectra of OLPs, and total-ion chromatograms of the OLPs (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.0c02204/suppl_file/ef0c02204_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Solid Acid Catalyst WO3-ZrO2 for the Catalytic Deoxygenation of Jatropha Oil for the Preparation of Aviation Paraffin

Prepared Multifunctional Catalyst Ni2P/Zr-SBA-15 and Catalyzed Jatropha Oil to Produce Bio-Aviation Fuel

The Deoxygenation of Jatropha Oil to High Quality Fuel Via the Synergistic Catalytic Effect of Ni, W2C and WC Species

Utilization of Illumination and Thermal Field in the Preparation of Jet–fuel Components: the Photothermic Catalysis of Jatropha Oil over the M/TiO2–HZSM–5

Zirconium-based MOFs-loaded Ionic Liquid-Catalyzed Preparation of Biodiesel from Jatropha Oil

Preparation of Ni2P/Zr-MCM-41 Catalyst and Its Performance in the Hydrodeoxygenation of Jatropha Curcas Oil

Catalytic conversion of triglycerides by metal-based catalysts and subsequent modification of molecular structure by ZSM-5 and Raney Ni for the production of high-value biofuel

Deoxygenation of waste cooking oil and non-edible oil for the production of liquid hydrocarbon biofuels

Catalytic hydroprocessing of waste cooking oil for the production of drop-in aviation fuel and optimization for improving jet biofuel quality in a fixed bed reactor

Transformation of Jatropha Oil into High-Quality Biofuel over Ni-W Bimetallic Catalysts

Production of Jet Fuel Range Hydrocarbons Using a Magnetic Ni–Fe/SAPO-11 Catalyst for Solvent-Free Hydrodeoxygenation of Jatropha Oil

Catalytic Cracking of Inedible Oils for the Production of Drop-In Biofuels over a SO 4 2– /TiO 2 -ZrO 2 Catalyst

Metal-Organic Framework-Derived Solid Catalyst for Biodiesel Production from Jatropha curcas Oil: Kinetic Study and Process Optimization Using Response Surface Methodology

A cleaner process for hydrocracking of jatropha oil into green diesel

Development of Solid Base Catalyst X/Y/MgO/γ-Al2O3 for Optimization of Preparation of Biodiesel from Jatropha Curcas L. Seed Oil

Engineered Biomass Waste‐Derived Activated Biochar Catalyst for Biodiesel Production from Jatropha curcas Oil

Preparation of Bio-aviation Fuels by Catalytic Hydrogenation of Castor Oil

Catalytic pyrolysis of coconut oil with Ni/SBA-15 for the production of bio jet fuel

Efficient catalytic conversion of jatropha oil to high grade biofuel on Ni-Mo<sub>2</sub>C/MCM-41 catalysts with tuned surface properties

Efficiency conversion of jatropha oil into high-quality biofuel over the innovative Ni-Mo2N based catalyst

Influence of NiMoP phase on hydrodeoxygenation pathways of jatropha oil