Abstract:Triglycerides from animal fats and vegetable oils are used as the sustainable feedstocks for the generation of biofuels. Tung oil, rubber seed oil, Jatropha curcas oil, waste cooking oil, and waste acidified oil were selected as the triglyceride feedstocks for the production of drop-in biofuels by a catalytic cracking process. The one-step process was carried out in a laboratory-scale fixed-bed reactor using a SO42–/TiO2-ZrO2 catalyst. The catalyst exhibited an excellent performance of cracking, deoxygenation, and aromatization reactions. Moreover, it could be repeatedly used for more than 15 times without an obvious deactivation. The catalytic cracking process resulted in a high yield (65–72%) of the biofuel, which showed a low acid value (3.78 mg KOH/g) and low oxygen content (1.49%). The biofuels were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis, proton nuclear magnetic resonance, and gas chromatography–mass spectrometry, suggesting that the dominant components of the biofuels are hydrocarbons in the range of C6–C26, including 17% alkanes, 56% olefins, and 22% monocyclic aromatics. These bio-hydrocarbon fuels in the crude form are chemically identical or near-identical to petroleum-based fuels, which have an attractive fraction distribution (>32% bio-gasoline, >50% green diesel, and <11% heavy fraction) and can be fractionated and used in different formulations depending on the types of desired fuels.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.0c02204?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.0c02204</a>.Additional validation table showing the properties of the STZ catalysts; additional validation figures showing FT-IR spectra of five inedible oils, TGA and DTG curves of OLPs, 1H NMR spectra of OLPs, and total-ion chromatograms of the OLPs (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.0c02204/suppl_file/ef0c02204_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Deoxygenation of waste cooking oil and non-edible oil for the production of liquid hydrocarbon biofuels

Co-hydrotreating of Used Engine Oil and the Low-Boiling Fraction of Bio-Oil Blends for the Production of Liquid Fuel

Upgrading Phenolic Compounds and Bio-Oil Through Hydrodeoxygenation Using Highly Dispersed Pt/TiO2 Catalyst

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Solid Acid Catalyst WO3-ZrO2 for the Catalytic Deoxygenation of Jatropha Oil for the Preparation of Aviation Paraffin

Hydrogen-Free Deoxygenation of Oleic Acid and Industrial Vegetable Oil Waste on CuNiAl Catalysts for Biofuel Production

Catalytic Cracking of Inedible Oils for the Production of Drop-In Biofuels over a SO 4 2– /TiO 2 -ZrO 2 Catalyst

Catalytic cracking of waste cooking oil followed with hydro-isomerization for high-quality biofuel production

Upgrading of Light Bio-oil from Solvothermolysis Liquefaction of an Oil Palm Empty Fruit Bunch in Glycerol by Catalytic Hydrodeoxygenation Using NiMo/Al 2 O 3 or CoMo/Al 2 O 3 Catalysts

Biocrude oil Production Upgrading by Catalytic Assisted Hydrothermal Liquefaction of Underutilized non-edible seed Biomass

Hydrocarbons Extracted from Advanced Pyrolysis Bio-Oils: Characterization and Refining

Methane-assisted selective bio-oil deoxygenation for high-quality renewable fuel production: A rational catalyst design and mechanistic study

Preparation of jet engine range fuel from biomass pyrolysis oil through hydrogenation and its comparison with aviation kerosene

Kinetics for the highly selective hybrid and cleaner diesel production by hydro-co-processing of a Jatropha curcas L. oil and gas oil blend using a supported Ni-W/Al-SBA-15 sulfided catalyst

Bio-oil upgrading by reactive distillation using p-toluene sulfonic acid catalyst loaded on biomass activated carbon

Catalytic hydroprocessing of waste cooking oil for the production of drop-in aviation fuel and optimization for improving jet biofuel quality in a fixed bed reactor

Improvement of Properties of Bio-Oil from Biomass Pyrolysis in Auger Reactor Coupled to Fluidized Catalytic Bed Reactor

Green hydrocarbons fuel production from agricultural waste biomass in the presence of a novel heterogeneous catalyst

Catalytic hydrocracking of jatropha oil over natural clay for bio-jet fuel production

Catalytic upgrading of the heavy fraction of waste coffee grounds pyrolysis bio-oil using supercritical ethanol as a hydrogen source to produce marine biofuel

Generating Organic Liquid Products from Catalytic Cracking of Used Cooking Oil over Mechanically Mixed Catalysts