Abstract:This study aims to demonstrate the general carbocatalytic conversion behaviors and reaction mechanisms of representative biomass-derived primary pyrolytic products towards product upgradation. Specifically, 4-Ethylguaiacol (4-EGC) and 5-hydroxymethylfurfural (5-HMF) were selected as lignin- and cellulose/hemicellulose-derived model compound, respectively, to elucidate the origin of products under different temperatures and biochar-reactant mixing ratios. Three reaction routes were distinguished, including side-chain elimination, ring opening and recombination, with each route exhibiting unique characteristics in terms of initiation temperature and selectivity. For 4-EGC, elimination of side-chains began at 500 °C, accompanied by alkyl transfer reactions to generate multi-alkyl-substituted phenols, while ring-opening started at 700 °C, and aromatics could be simultaneously produced. Biochar did not change the initiation temperature of each route but significantly influenced the product distribution. Comparing the biochar-reactant mixing ratio of 0 and 10:1, at 600 °C the selectivity towards phenols increased from 20.52 % to 54.98 %, and at 800 °C the selectivity towards aromatics increased from 14.28 % to 53.01 %. For 5-HMF, the elimination of side chains already began at 400 °C, and the ring-opening started at around 600 °C, but recombination products (phenols and aromatics) would not notably emerge until 700 °C. Biochar could both lower the initiation temperature of each reaction route and change the conversion efficiency for 5-HMF owing to the lower stability of furan ring. However, the impact of biochar on selectivity towards aromatics was less pronounced compared to 4-EGC. Even at 800 °C, the relative content of aromatics only reached 28.88 % with a biochar-reactant mixing ratio of 10:1 for 5-HMF. Comparative investigations on biochar structure before and after co-pyrolysis reactions further revealed that, at 600 °C, biochar maintained its structural integrity, but at 800 °C, it underwent significant changes, including amorphous carbon deposition covering the surface. Raman spectra analysis supported these findings, showing that biochar becomes more amorphous after reactions at 600 °C, while at 800 °C, larger aromatic ring systems form on the biochar, reducing defect sites.

Catalytic Decomposition of Naphthalene and Phenol over Biomass Char

Heterogeneous Cracking Reaction of Tar over Biomass Char, Using Naphthalene As Model Biomass Tar

CATALYTIC DECOMPOSITION OF TOLUENE OVER BIOMASS CHAR

Catalytic Pyrolysis of Tar Model Compound with Various Bio-Char Catalysts to Recycle Char from Biomass Pyrolysis

Gas Emissions from Blends of Bituminous Coal and Biomass Chars under Different Pyrolysis Conditions

Promotion of Monocyclic Aromatics by Catalytic Fast Pyrolysis of Biomass with Modified HZSM-5

Performance of catalytic cracking of biomass tar and catalyst preparation

Generation features and kinetics of gas products in bio-tar catalytic cracking by char for biomass gasification

DFT Study on the Chemisorption and Reforming of Naphthalene over Bio-Char: the Detailed Mechanism of Carbon Deposition and Hydrogen Production

Insight into the Ex Situ Catalytic Pyrolysis of Biomass over Char Supported Metals Catalyst: Syngas Production and Tar Decomposition

Analytical Py-GC/MS study on conversion behaviors and reaction mechanism of biochar-mediated catalytic upgradation of primary pyrolytic products from lignocellulosic biomass

Evaluation of the catalytic performance of different activated biochar catalysts for removal of tar from biomass pyrolysis

Catalytic conversion characteristics of tar at different temperatures during circulating fluidized bed gasification

Preparation of High Catalytic Activity Biochar from Biomass Waste for Tar Conversion

Comparative study on pyrolysis and catalytic pyrolysis upgrading of biomass model compounds: thermochemical behaviors, kinetics, and aromatic hydrocarbon formation

Catalytic performance of activated lignite chars on biomass tar cracking

Gasification of High Heating-rate Biomass-derived Chars at Elevated Temperatures

Kinetic and thermodynamic analysis of biomass catalytic pyrolysis with nascent biochar in a two-stage reactor

Catalytic mechanism of N-containing biochar on volatile-biochar interaction for the same origin pyrolysis

Bamboo Wastes Catalytic Pyrolysis with N-doped Biochar Catalyst for Phenols Products

Catalytic conversion of toluene as a biomass tar model compound using monolithic biochar-based catalysts decorated with carbon nanotubes and graphic carbon covered Co-Ni alloy nanoparticles