Abstract:Purpose - This paper aims to provide a 3D finite element (FE) model for dynamic simulation of cutterhead and soil interaction in slurry shield tunneling. Design/methodology/approach - Dynamic numerical simulation of excavation process is realized by combined use of submodeling method and arbitrary Lagrangian Eulerian (ALF) approach. The model size reduction, soil mesh refinement and stress state initialization are fulfilled by submodeling. The large soil deformations, failures and flows are handled by ALE approach. Computation time is reduced by parallel domain decomposition with recursive coordinate bisection method. Validation of the proposed approach is achieved by comparing the numerical results with monitored data from the model test for Yangtze River tunneling project. Findings - The proposed approach proves to be an effective technique to simulate the cutterhead and soil interaction dynamically in tunnel excavation. Comparative study on the effect of mesh density indicates the requirement of relative mesh refinement. Exploration of the parallel computing performance points out the best decomposed domain for the simulation. Parametric study on the effect of rotary speed and investigation on soil properties presents the significant factors for torque. Practical implications - The proposed numerical model can help in the development process of reduced-scale model test, as well as design and selection of slurry shield machines. Originality/value - The originality comes from the need to evaluate the excavation performance of slurry shield machine in tunneling project. This contribution provides a 3D numerical approach, which takes into account the stress state in soil and dynamic contact effects between soil and cutterhead. In this work, large deformation in soil is handled. Besides, soil failures and flows are captured.

Dynamic Numerical Simulation of Excavation in Shield Tunnelling

Numerical simulation of cutterhead and soil interaction in slurry shield tunneling

STUDY OF GROUND HEAVE AND SUBSIDENCE INDUCED BY SHIELD TUNNELLING IN SOFT GROUND

ANALYSIS OF GROUND SURFACE DISPLACEMENT AND HORIZONTAL MOVEMENT OF DEEP SOILS INDUCED BY SHIELD ADVANCING

Torque Calculation Model of Cutting Head in Shield Machine and Experimental Study

Total Thrust Calculation and Test Research for Soil Pressure Balancing Shield Tunneling

Mechanical structure and hydraulic system design of 1.2 m simulated shield machine

A New Calculation Model of Cutterhead Torque and Investigation of Its Influencing Factors

Numerical Simulation of Suspended Sediment Diffusion and Movement during Excavation

3 D Numerical Analysis on the Behavior of Excavation

The Simulation of Soil Cutting Using Shield Cutter Pan Based on ALE Method

Model Design and Application for Excavation Face Stability in Upward Shield Tunneling

Study on 3-D Numerical Simulation for Soil Cutting with Large Deformation

Numerical Simulation of a Deep Excavation Near a Shield Tunnel

Three Dimensional Numerical Simulation of Shield Tunneling Through Flood Levee Based on Parallel Computing

Study on Collaborative Simulation of Excavation System of the Shield Machine in Composite Strata

Finite Element Simulation Analysis on Shield Tunnel Driven Process

Impact Analysis of Tunneling Process on Flood Levee by Three Dimensional Numerical Simulation with Verification by Test Section

Three-dimensional Cutting Simulation by Cutterhead of Shield Machine Based on Parallel Computing

Finite Element Modelling of Excavation and Advancement Processes of a Shield Tunnelling Machine

Development and evaluation of a process-oriented 3D finite element model for earth pressure balance shield tunneling