Abstract:The cold start issue of methanol engines limits their wide application in cold seasons and regions. To explore the underlying mechanisms and propose effective improvement measures, the evaporation characteristics of methanol at 243–303 K were first investigated by the single droplet method in this study. The effects of ambient temperature, initial diameter, fuel temperature and intake air flow velocity on evaporation of methanol droplets were quantitatively analyzed and their guidance for improving the cold start performance of methanol engines were discussed. The results revealed that the evaporation process of methanol droplets in low temperature and humid environment showed two-stage feature due to its hygroscopicity, including pure methanol evaporation and water-dominated evaporation of methanol–water mixture, but it could be regarded as the evaporation of a pseudo single component and the same was true for other binary mixtures. The existence of water in methanol droplets not only led to their incomplete evaporation at temperatures below 263 K, but also caused the linear change of their evaporation rates with temperature, which was different from the exponential change of pure methanol evaporation rate with temperature. Increasing the ambient temperature from 243-283 K to 293 K was optimal for promoting methanol evaporation. Reducing droplet diameter inhibited the water absorption of methanol droplets, thus enhancing their evaporation rates. Increasing fuel temperature could not promote droplet evaporation, but mainly influenced water absorption of methanol droplets. The promotion effect of air flow on methanol evaporation became weaker with the increase of intake air flow velocity, especially when it exceeded 3 m/s. The findings of this study suggest that multiple methods should be combined to improve the cold start performance of methanol engines.

Effect of ambient temperature on cold start behavior of S.I.methanol engine

Combustion of a Spark-Ignition Methanol Engine during Cold Start under Cycle-by-Cycle Control

Effects of Ambient Temperature on Firing Behavior and Unregulated Emissions of Spark-Ignition Methanol and Liquefied Petroleum Gas/Methanol Engines During Cold Start

Combustion and Hydrocarbon (hc) Emissions from A Spark-Ignition Engine Fueled with Gasoline and Methanol During Cold Start

Effects of Ambient Temperatures on Regulated and Unregulated Emissions from Methanol/Gasoline Engine During Cold Start

Effect of Preheating on Firing Behavior of a Spark-Ignition Methanol-Fueled Engine during Cold Start

Effect of preheating on firing behavior of an electronically controlled injection methanol engine during cold start

Investigation of the cold-start engine performance at a low temperature for an engine fuelled with alternative fuel

Investigation on Firing Behavior of the Spark-Ignition Engine Fueled with Methanol, Liquefied Petroleum Gas (LPG), and Methanol/LPG During Cold Start

Cold start firing behavior of electronically controlled injection methanol engine with LPG as ignition improver

Effects of Fuel Injection Timing on Combustion and Emissions of A Spark-Ignition Methanol and Methanol/Liquefied Petroleum Gas (lpg) Engine During Cold Start

Improvement of Spark-Ignition (SI) Engine Combustion and Emission during Cold Start, Fueled with Methanol/Gasoline Blends

Investigation on the Emission Characteristics of a SI Engine Fueled with Alcohol-Gasoline Blends During Cold Start Process

Investigation on the Combustion Characteristics of a SI Engine Fueled with Methanol-Gasoline Blends During Cold Start Process

Experimental Investigation of Cold-Start Unregulated Emissions and Combustion Characteristics of Low-Percent Methanol-Gasoline Engine

Combustion Characteristics of SI Engine Fueled with Methanol-Gasoline Blends During Cold Start

Effect of Methanol Addition into Gasoline on the Combustion Characteristics at Relatively Low Temperatures

Investigation on cold start issues of methanol engines and its improvement from the perspective of droplet evaporation

Effects of injection and spark timings on combustion, performance and emissions (regulated and unregulated) characteristics in a direct injection methanol engine

Investigation on the cold start characteristics of a hydrogen-enriched methanol engine

Assessment of the Effects of Intake Temperature and Injector Structure on the Combustion Characteristics of Direct‐Injection Spark‐Ignition Methanol Engines