Abstract:Under the influence of wind and horizontal seismic forces, structures such as piers in curved beam bridges, main arches of steel tube concrete arch bridges, and frame columns may experience combined bending‐torsion stress states, affecting the safe usage of the structure. To investigate the mechanical performance of circular concrete‐filled steel tube(CFST) columns under bending‐torsional coupling, a three‐dimensional solid‐shell finite element model of circular concrete‐filled steel tube columns under various bending and torsion ratios (k) was established using ABAQUS software, and validated with existing experiments on such columns under bending‐torsional loading. Parametric analysis was conducted to explore the trends of interface slip and the restraining effect in circular concrete‐filled steel tube columns under different bending and torsion ratios, analyzing the impact of parameters such as the yield strength of steel, concrete strength, steel content in the cross‐section, and shear–span ratio on the combined bearing capacity. The results of the parametric analysis show that: (1) with the increase of k, the relative slip at the interface between the core concrete and the outer steel tube first increases and then decreases, with interface slip leading to a reduction in the load‐bearing capacity; (2) the relative slip at the interface between the core concrete and the outer steel tube first increases and then decreases, with interface slip leading to a reduction in the load‐bearing capacity; (3) with the increase of k, the circumferential and axial stresses in the steel tube surface of the circular concrete‐filled steel tube columns increase, while the shear stress decreases, leading to a transition in the failure mode of the columns from combined bending‐torsional failure to bending‐shear failure. Based on these findings, a practical calculation formula for the bending‐torsional combined bearing capacity of circular concrete‐filled steel tube columns is proposed, offering high calculation accuracy and serving as a reference for the design of such components.

Bending resistance of steel-concrete composite continuous beam

Bending Stiffness of Steel-Concrete Composite Beams Considering Effect of Slip

RESEARCH ON FLEXURAL PERFORMANCE OF DOUBLE-STEEL REINFORCED CONCRETE BEAM

Fire Resistance and Bending Bearing Capacity of Fire-Resistant Steel-Concrete Composite Beams

Bending Stiffness of Bamboo-Concrete Composite (BCC) Beams under Short-Term Loads

Reduced Stiffness of Composite Beams Considering Slip and Shear Deformation of Steel

Stiffness and Deflection of Steel–Concrete Composite Beams under Negative Bending

Bending Performance of Lightweight Aggregate Concrete-filled Steel Tube Composite Beam

Finite Beam Element for Curved Steel-Concrete Composite Box Beams Considering Time-Dependent Effect

Flexural Performance of Rectangular Cfst Members

Research on the mechanical performance of circular concrete‐filled steel tube columns under bending‐torsional coupling

Analysis of Equivalent Flexural Stiffness of Steel–Concrete Composite Beams in Frame Structures

Research on the bending stiffness of hollow CFST members

Flexural behavior of circular concrete-filled steel tube members reinforced with annular stiffener

Test and Numerical Model of Curved Steel-Concrete Composite Box Beams under Positive Moments

Numerical study on I-section steel-reinforced concrete-filled steel tubes (SRCFST) under bending

FINITE ELEMENT ANALYSIS ON CONCRETE-ENCASED CFST COLUMN TO REINFORCED CONCRETE BEAM JOINTS

Experiment on Old Concrete Bridge Widened with Steel-concrete Composite Beams

Experimental and Numerical Study of Curved SFRC and ECC composite beams with Various Connectors

Experimental and Numerical Study on Flexural Performance of a Novel Steel-Encased Concrete Composite Beam

Performance of CFDST Beams Using High-Strength Steel under Bending