Abstract:Bamboo-concrete composite (BCC) beams are newly-innovated products used for floor system which synergistically utilizes bamboo and concrete components. These composite beams at cur-rent technology belong to the beam characterized with partial composite action due to the ex-istence of relative slip between bamboo segment and concrete slab. Existing investigations have demonstrated that the load bearing capacity of BCC beams depends on their bending stiffness; however, very limited prediction models are available to accurately estimate the bending stiffness of BCC beams. At present, the bending stiffness of BCC beams is predicted with the help of gamma-method in Eurocode 5-Part 1-1, and available studies have demonstrated that this method overestimates the bending stiffness of BCC beams. To this end, this paper presents a novel explicit model characterized with mechanism and data mining to predict the bending stiffness of BCC beams under short-term loads. Three steps were performed to achieve the aforementioned research objective. The first step was to introduce the axial force transfer coefficient into the equilibrium equations of internal force for bamboo segment and concrete slab. Secondly, the bending stiffness of BCC beams was established by taking into account the effect of relative slip with the help of existing experimental results from the interfacial shear test and flexural test. Finally, the proposed model was validated by comparing with flexural performance results of BCC beams collected from available literature as well as those obtained from gamma-method. The comparative results show that: i) the predicted bending stiffness of BCC beams is much closer to tested ones compared with gamma-method; ii) the errors of proposed model predicting the bending stiffness for most BCC beams are within 10% of test results; however, nearly half of the predicted ones using gamma-method have errors exceeding 10% of test results, both of which verify that the mechanism and data mining-dual driven model receives a better prediction for short-term bending stiffness of BCC beams.

Glucose stimulation of the antilipolytic effect of insulin in humans.

Time-dependent creep and shrinkage analysis of curved steel–concrete composite box beams

[Hernia of the Jean-Louis Petit triangle].

Finite beam element with 22 DOF for curved composite box girders considering torsion, distortion, and biaxial slip

Bending Stiffness of Bamboo-Concrete Composite (BCC) Beams under Short-Term Loads

Reduced Stiffness of Composite Beams Considering Slip and Shear Deformation of Steel

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Bending Stiffness of Steel-Concrete Composite Beams Considering Effect of Slip

Fiber beam-column element for circular concrete filled steel tube under axial-flexure-torsion combined load

Shear Lag Including Axial Balance of Box Beams by Finite Segment Model

Torsional behavior of curved concrete box beam with small radius

Geometric nonlinear dynamic analysis of curved beams using curved beam element

Beam Element Model Analysis of Composite Beam with Constrained Damping Layer

Stiffness amplification coefficient for composite frame beams considering slab spatial composite effect

Beam-Truss Model of Steel-Concrete Composite Box-Girder Bridges

Analysis of Equivalent Flexural Stiffness of Steel–Concrete Composite Beams in Frame Structures

Experimental Study and Theoretical Analysis of Steel–Concrete Composite Box Girder Bending Moment–Curvature Restoring Force

Shear Deformation and Sliding-Based Fiber Beam-Column Model for Seismic Analysis of Reinforced Concrete Coupling Beams

Stiffness and Deflection of Steel–Concrete Composite Beams under Negative Bending

A Novel Straight Beam Element for Lateral-Distortional Deformation Analysis of Frames and Curved Beams Made of Monosymmetric I-Sections

Flexural Performance of Rectangular Cfst Members