EXPERIMENTAL STUDY OF EFFECTS OF CYCLIC LOADING AND UNLOADING PORE WATER PRESSURES ON DEFORMATION CHARACTERISTIC OF SANDSTONE

许江,杨红伟,李树春,姜永东

DOI: https://doi.org/10.3321/j.issn:1000-6915.2009.05.004

2009-01-01

Abstract:Triaxial compression experiments have been carried out to study the effects of the cyclic loading and unloading pore water pressures on the deformation characteristic of saturated sandstone when the axial stress and confining pressure are invariant using the MTS815 rock mechanics testing system. The experimental results have shown that there are anomalistic Z-shaped nonlinear wave in the stress-strain hysteresis curve at the stage of compaction under loading and unloading;and initial residual deformation is relatively large,therefore,the hysteresis loop is not so obvious. In addition,it has been observed that at the elastic coupled stage,the stress-strain curve which rises with concave Z-shaped wave appears inflection point before coming to a head;at this point, strain is the maximum at loading. While at unloading,it is inflexion at the stress-strain curve which drops with convex Z-shaped wave before touching bottom;at the same time,the strain fetches the minimum. Meanwhile the stress-strain hysteresis loop,showing the stage from sparse to dense,is stable which indicates evolution from elastic deformation to plastic deformation. The dissipation energy of different upper limits and different amplitude areas forms into asymmetrical X-shaped at the pore water pressure. The dissipation energy decreases gradually at loading with the increase of pore water pressure. Otherwise,at unloading,it decreases gradually with reducing of pore water pressure. The position and angle of the X-shaped crossing are related to the different upper limits and amplitude areas. The relationship between the residual strain and cyclic numbers accords with the power of negative index under the cyclic loading and unloading pore water pressures.