Abstract:The role of low-temperature chemistry/ignition (LTC/LTI) in aero engine-like combustors that feature confined bluff-body and swirling flows inside has been studied in the present work. A series of CH4/DME/air mixtures were experimentally investigated at ϕ=0.65 with the volume fraction of DME in the fuel blend (αDME) ranging from 0% to 100% to take LTI into account. To this end, OH-PLIF and CH2O-PLIF measurements combined with PIV and thermocouple methods are used to capture high-temperature and low-temperature flames (HTFs and LTFs) and the flow field and temperature in the outer recirculation zone (ORZ). It is found that adding DME into the lean CH4/air mixture has the potential to introduce LTF in the ORZ under certain conditions. There are three flame regimes in the bluff-body swirl burner in terms of DME enrichment (αDME): (1) When αDME<50%, neither of LTF and HTF exist in the ORZ, and only a V-shape HTF is observed between the inner shear layer (ISL) and inner recirculation zone (IRZ), denoted as regime I. (2) When 50%≤αDME≤70%, a stable LTF in the ORZ can co-exist with the above V-shape HTF, denoted as regime II. (3) When αDME>70%, besides the V-shape HTF, the LTF in the ORZ and a new HTF front between the ORZ and outer shear layer (OSL) can exist intermittently, i.e., the LTF first occurs in the ORZ and then transitions to the new HTF between the ORZ and OSL, denoted as regime III. Furthermore, using an ignition Damköhler number (Daig), defined as the ratio of maximum fluid residence time and evaluated shortest first-stage or second-stage ignition delay time in the ORZ, is able to reasonably classify the flame regimes. These results open up the possibility of employing LTI to extend the stability margin of lean swirling flames.

Experimental Investigation of Low-Temperature Combustion (ltc) in an Engine Fueled with Dimethyl Ether (Dme)

Search for the Optimizing Control Method of Compound Charge Compression Ignition (ccci) Combustion in an Engine Fueled with Dimethyl Ether

Study on HCCI Combustion Fueled with DME

Experiment on CCCI Combustion in a Engine Fueled with DME

An Experimental Investigation of Optimizing Control of Compound Charge Compression Ignition(CCCI)Combustion in an Engine Fueled with DME

Experimental And Numerical Study On Auto-Ignition And Combustion Of Homogeneous Charge Compression Ignition Fueled With Dimethylether

Experimental Study of HCCI Combustion Process Fueled with DME

Performance of a Methanol-Fueled Direct-Injection Compression-Ignition Heavy-Duty Engine under Low-Temperature Combustion Conditions

Experimental Study on Dimethyl Ether Combustion Process in Homogeneous Charge Compression Ignition Mode

Experimental Investigation of Low-Temperature Autoignition in Turbulent Premixed Swirling Flames

Combustion and Emission Characteristics of a Homogeneous Charge Compression Ignition Engine

Evaluation on the Effects of Compression Ratio, CO2 and LPG on HCCI Combustion Fueled with DME

New Controllable Premixed Combustion for Dimethyl Ether Engine

Experimental Investigation on Combustion Characteristics of DME HCCI Engine

High density-low temperature combustion in diesel engine based on technologies of variable boost pressure and intake valve timing

An Investigation on Combustion and Exhaust Emissions of Direct Injection Diesel Engine Fuelled with Dimethyl Ether

Experimental Study on Homogeneous Charge Compression Ignition Combustion With Fuel of Dimethyl Ether and Natural Gas

Investigation On Combustion And Emissions Of Dme/Gasoline Mixtures In A Spark-Ignition Engine

Experimental Study On Homogeneous Charge Compression Ignition Operation By Burning Dimethyl Ether And Methanol

Study on Combustion Characteristics of Partial Premixed Charge Compression Ignition-Direct Injection Engine Fueled with Dimethyl Ether

The Characteristics of Homogeneous Charge Compression Ignition Combustion for Dimethyl Ether