The Characteristics of Homogeneous Charge Compression Ignition Combustion for Dimethyl Ether

HUANG Jin-cheng,ZHANG Quan-chang,HUANG Hua,LI Xian-jing
DOI: https://doi.org/10.3969/j.issn.1001-2222.2007.03.006
2007-01-01
Abstract:The experimental study of homogeneous charge compression ignition(HCCI) combustion process was carried out on a singe cylinder diesel engine fueled with dimethyl ether(DME).The research shows that the HCCI engine combustion demonstrates two stages heat release processes,which are low temperature reaction and high temperature reaction,and the earlier ignition of DME.The fuel/air equivalent ratio of the mixture has little influence on the initial point of low temperature reaction,but has much influence on the initial point of high temperature reaction.With the increase of the fuel/air equivalent ratio,the initial point of high temperature reaction advances.When the fuel/air equivalent ratio is 0.21,the engine has slight knock phenomenon. With the increase of engine speed,the initial point of low temperature reaction advances,and the heat release rate on the initial point of the high temperature reaction increases slightly.After intake temperature and cooling liquid temperature increase,the initial points of low temperature reaction and high temperature reaction both advance.The maximum pressure in the cylinder appears before top dead center(BTDC) when the intake temperature go over 300 K.Accordingly,the intake temperature is the important parameter to control the initial point of ignition.
What problem does this paper attempt to address?