Enhanced H2S Removal Efficiency Using CuO/Al2O3 Catalyst Impregnated with Ca(NO3)2: Influence of Calcination Temperature and Mechanistic Insights
Mengxue Yin,Suresh C. Pillai,Hailong Wang,Feiyue Fan,Hong Hou
DOI: https://doi.org/10.1016/j.psep.2024.11.036
IF: 7.8
2024-01-01
Process Safety and Environmental Protection
Abstract:A series of Ca(NO3)2-CuxO/Al2O3 catalysts with different calcination temperatures were designed to remove H2S effectively. Experimental and characterization results indicate that the calcination temperature can influence the catalyst's specific surface area, basic sites, and oxygen vacancies (VOs) concentration, thereby promoting its desulfurization performance. The Ca(NO3)2-CuxO/Al2O3 catalyst, calcined at 230 °C, exhibits an optimal surface structure. It demonstrates optimal H2S desulfurization performance at a temperature of 60 °C and relative humidity of 60 %, achieving a removal capacity of 486.67 mg/g. The VOs in CuxO (CuO and Cu2O) induce a unique catalytic of H2O, which generates hydroxy radicals (·OH) to oxidize the H2S anion to S. The introduction of Ca2+ provides basic sites to buffer pH, and NO3- with H+ removes H2S through cyclic oxidation, significantly enhancing the desulfurization performance of the Cu-based catalyst. The CaO-CuxO/Al2O3 catalyst, calcined at 700 °C, suffers from a deteriorated catalyst structure, leading to the rapid formation of desulfurization by-products due to the presence of CaO covering the catalyst surface. This diminishes the effectiveness of Cu, significantly impairing the catalyst's desulfurization performance (150.47 mg/g). Consequently, desulfurization mechanisms of Ca(NO3)2-CuxO/Al2O3 and CaO-CuxO/Al2O3 are proposed, offering effective strategies for the design and optimization of subsequent high-efficiency catalysts.