Abstract:In this study, we investigated the relationship between the decarburization effect of the solid-state decarburization method for preparing silicon steel and the atomic diffusion behavior in the matrix, focusing on 1 mm thick Fe-0.18 wt% C-Si (1.5, 3.5 wt%) alloy strips as the research object. Solid-state decarburization experiments were carried out in an Ar-H2O-H2 atmosphere, and the self-diffusion behavior of C and Si in Fe-C-Si alloy system was simulated by molecular dynamics. The results show that the molecular dynamics simulation results are consistent with the decarburization experimental results. When the temperature is lower than 800 °C, the atoms maintain a compact bcc structure, so the migration rate of carbon is low. When the temperature rises, the atoms move violently, resulting in the destruction of the crystal structure. Because the atomic arrangement tends towards a disordered structure, the migration rate of C is high and the diffusion coefficient increases. The experimental results showed that the decarburization rate was accelerated. At the same temperature, the diffusion activation energy Q = 48.7 kJ·mol−1 of carbon in an Fe-3.5 wt% Si-C alloy matrix can be calculated. The diffusion activation energy of carbon Q = 47.3 kJ·mol−1 was calculated using a molecular dynamics simulation. When the content of Si is 3.5 wt% and 1.5 wt%, the diffusion series of Si can be expressed as D3.5Si, Si = 8.54 × 10−10 exp(−33,089.7/RT) m2/s and D1.5Si, Si = 2.06 × 10−9 exp(−46,641.5/RT) m2/s, respectively. When the Si content is 3.5 wt%, the diffusion coefficient of Si is larger. After diffusion to the near surface, it combines with the remaining O to form a continuous strip of SiO2. When the Si content is 1.5 wt%, the diffusion coefficient of Si is small. The remaining O diffuses in the matrix and will oxidize when encountering Si; it cannot aggregate in a highly-dispersed distribution. The lattice transition from face centered cubic lattice austenite to body centered cubic lattice ferrite occurred in the matrix of the thin strip. The diffusion coefficient of C in ferrite is much larger than that in austenite. Therefore, the decarburization rate suddenly increases before decarburization stagnation. With the increase in Si content, the diffusion activation energy of C decreases, which promotes the decarburization effect.

Low-energy Ar Ion-Induced Anomalous Carbon Diffusion in Pre-Decarburized 45 Steel

Irradiation-induced Grain Growth in Nanocrystalline Reduced Activation Ferrite/martensite Steel

Irradiation-induced Precipitation and Inverse Coarsening of G-phase in Austenitic Stainless Steel Weld Metal

Irradiation accelerated corrosion of alumina-forming austenitic steels in supercritical CO2: The oxide scale formed within an individual grain or affected by grain boundary

Super Long-Range Diffusion of Carbon During Proeutectoid Ferrite Transformation

Anomalous Ion Accelerated Bulk Diffusion of Interstitial Nitrogen

Experimental Study on Decarburization of Stainless Steel under Electromagnetic Levitation

Irradiation accelerated corrosion of alumina-forming austenitic steels in supercritical CO 2 : the oxide scale formed within an individual grain or affected by grain boundary

Study on Diffusion Kinetics and Law of Chromium on the Surface of Low-Carbon Steel

Atom-probe tomographic and dilatometric studies of phase-transformations after inter-critical annealing of a low-carbon dual-phase steel

Microstructural Evolution of CLAM Steel under 3.5 MeV Fe 13+ Ion Irradiation

Diffusion Behavior of Carbon and Silicon in the Process of Preparing Silicon Steel Using Solid-State Decarburization

Study on micro-mechanism of carbon atom diffusion in surface nanocrystallization low carbon alloy steel using molecular dynamics simulation

Ar Ion Irradiation Hardening of High-Cr Ferritic/martensitic Steels at 700 °C

Dilatometric Research on Pearlite-to-austenite Transformation of Fe–1C–1.44Cr Low-Alloy Steel

Dynamic recrystallization of ferrite in a low-carbon steel

Dissociated dislocation-mediated carbon transport and diffusion in austenitic iron

Mechanism of diffusion promotion of carbon atoms during carburization of 20Cr2Ni4A alloy steel after lanthana-bearing supersonic fine particle bombarding pretreatment

Microstructure evolution and lead-bismuth eutectic corrosion behavior of 11Cr1Si ferritic/martensitic steel after proton irradiation

Diffusion behavior of carbon and its hardening effect on plasma carburized M50NiL steel: Influences of treatment temperature and duration