Abstract:We demonstrated optical amplification at 650 nm in KMnF3:Yb3+,Er3+@KMnF3:Yb3+ active-core-active-shell nanoparticle (NP) doped polymer waveguides pumped by a 976 nm laser diode for the first time. KMnF3:Yb3+,Er3+ NPs were synthesized via a solvothermal method. With the excitation of a 976 nm laser diode, bright red upconversion (UC) fluorescence was observed from KMnF3:Yb3+,Er3+ NPs owing to the existence of efficient energy transfer between Er3+ and Mn2+:H-2(11/2),S-4(3/2) + (6)A(1) -> I-4(15/2) + T-4(1),H-2(9/2) + (6)A(1) -> I-4(13/2) + T-4(1) and I-4(15/2) + T-4(1) -> F-4(9/2) + (6)A(1). The red UC emissions originated from the F-4(9/2) -> I-4(15/2) transition of Er3+. Furthermore, the red UC emissions of KMnF3:18 mol% Yb3+,1 mol% Er3+@KMnF3:2 mol% Yb3+ NPs were enhanced by 7.5 times compared to that of KMnF3:18 mol% Yb3+,1 mol% Er3+ core-only NPs after coating an active shell containing Yb3+ ions on the core-only NPs. The above results showed that the active-shell could be used to not only suppress surface quenching but also transfer the pump light to the core region efficiently through Yb3+ ions inside the active-shell. By using KMnF3:18 mol% Yb3+, 1 mol% Er3+@KMnF3:2 mol% Yb3+ NPs as the gain medium and doping NPs into a polymer waveguide, we constructed polymer-based waveguide amplifiers. For an input signal power of 7.4 mW and a pump power of 45.2 mW, a relative optical gain of similar to 3.5 dB was obtained at 650 nm in a 17 mm-long waveguide.

Amplifying Characteristics of Er3+/Yb3+ Codoped Series-Cascaded Double-Microring Resonators

Analysis for Amplifying Characteristics of Er3+–Yb3+-co-doped Microring Resonators

Modeling Rare-Earth Doped Microfiber Ring Lasers

Low-Threshold Microlaser in Er : Yb Phosphate Glass Coated Microsphere

A Numerical Method for Solving Gain Characteristics of Er3+/Yb3+ Codoped Waveguide Amplifiers

Gain Characteristics of Er~(3+)/Yb~(3+) Co-Doped Waveguide Amplifiers

Numerical Analysis of Amplification Characteristics of ErxY2 − Xsio5

Model Results of Er-Yb Double Clad Fiber Amplifier

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

Power scalability of a continuous-wave high-power Er-Yb co-doped fiber amplifier pumped by Yb-doped fiber lasers

Gain Competition Induced Mode Evolution and Resonance Control in Erbium-Doped Whispering-Gallery Microresonators

Gain and noise characteristics of phosphate glass Er^3+ – Yb^3+ co-doped waveguide amplifiers

High-power and high-brightness Er:Yb codoped fiber MOPA operating at 1535 nm

414.9 W In-Band Pumped Er/Yb Co-Doped Fiber Amplifier Seeded by a Random Fiber Laser.

On-chip Integrated Few-Mode Erbium–ytterbium Co-Doped Waveguide Amplifiers

Demonstration of Yb3+-doped and Er3+/Yb3+-codoped On-Chip Microsphere Lasers

KMnF3:Yb3+,Er3+@KMnF3:Yb3+ active-core–active-shell nanoparticles with enhanced red up-conversion fluorescence for polymer-based waveguide amplifiers operating at 650 nm

6.85 Kw Ytterbium-Raman Fiber Amplifier Based on Adjustable Raman Threshold Method

First Experimental Investigation of the Amplification of a Yb-doped Fiber Laser Pumped with 1000 and 1014-Nm Laser Diodes

219.6 W large-mode-area Er:Yb codoped fiber amplifier operating at 1600 nm pumped by 1018 nm fiber lasers

Study on Er3+-Yb3+ co-doped La2O3–Al2O3 glasses for C-band optical waveguide amplifier with high luminous efficiency and low pump threshold