Abstract:Using molecular dynamics simulation, we studied the dynamic behavior and microscopic mechanisms of near-surface helium bubble in single crystal Cu subjected to shock loading. The whole process of bubble evolution includes three stages: shock compression, equilibration, and expansion-rupture-ejection. When shock wave reaches the bubble, it is compressed and an internal jetting is formed, leading to the increases of velocity and internal pressure of the bubble. The internal pressure then reduces slightly due to the relaxation of helium atoms. After the reflected rarefaction wave reaching the bubble, the internal pressure greatly decreases to several GPa and the volume expands a lot. Because of the pressure gradient between the bubble and the free surface, the velocity of the bubble increases again, squeezing the upper thin metal layer continuously and finally making it plastically fail or melt. Then the bubble ruptures, ejecting helium atoms and some Cu clusters. Impact strength has significant effects on this dynamic process. Higher impact velocity leads to stronger jet and more significant expansion and rupture of the bubble. The latter is attributed to the microstructure evolution of the surrounding metal atoms and the upper metal layer, for which plastic failure or melt is observed at higher impact velocity. The influences of helium bubble size and number ratio of He/vacancy are also investigated. We find that the internal jet is stronger and temperature rise and local melting of metal is more obvious for larger bubble, resulting in easier failure of the metal layer and thus more remarkable expansion and rupture of the bubble. Higher number ratio results in weaker internal jet but stronger expansion and rupture of the bubble. This is because more helium atoms in the bubble for higher ratio can impact on the upper metal layer, leading to easier failure of the metal layer.

Release Melting of Shock-Loaded Single Crystal Cu

Melting of Cu under Hydrostatic and Shock Wave Loading to High Pressures

Anisotropic Responses and Initial Decomposition of Condensed-Phase Β-Hmx under Shock Loadings Via Molecular Dynamics Simulations in Conjunction with Multiscale Shock Technique.

Shock-induced Spall in Solid and Liquid Cu at Extreme Strain Rates

Initial decomposition mechanism of solid-state HMX for steady shock waves

Molecular Insight into the Deformation of Single Crystal Copper Loaded by High-Speed Shock Wave

The rupture and ejection of near-surface helium bubble in single crystal Cu under shock loading

Shock-induced spall in copper: The effects of anisotropy, temperature, defects and loading pulse

A metastable phase of shocked bulk single crystal copper: an atomistic simulation study

Crystal Plasticity Finite Element Simulation of High-Rate Shock Deformation Process of <100> LiF

The effects of defects on melting of copper

Shock Response of Copper Bicrystals with a ∑3 Asymmetric Tilt Grain Boundary

Molecular dynamics simulation of mechanical response of Cu50Zr50 metallic glass under double shock loading

The Effects of Defects on Copper Melting under Hydrostatic and Shock Loading

Dislocation evolution and peak spall strengths in single crystal and nanocrystalline Cu

Anisotropic Shock Response of Columnar Nanocrystalline Cu

Shock Response of He Bubbles in Single Crystal Cu

Shock Wave Loading And Spallation Of Copper Bicrystals With Asymmetric Sigma 3 < 110 > Tilt Grain Boundaries

Dynamic deformation of Al under shock loading

Evolution of dislocation mechanisms in single-crystal Cu under shock loading in different directions

Shock Wave Loading and Spallation of Copper Bicrystals with Asymmetric Σ3⟨110⟩ Tilt Grain Boundaries