Abstract:A simple design procedure is used to generate photonic crystal fibers (PCFs) with ultra-flattened chromatic dispersion. Only four parameters are required, which not only considerably saves the computing time, but also distinctly reduces the air-hole quantity. The influence of the air-hole diameters of each ring of hexagonal PCFs (H-PCF, including 1-hole-missing and 7-hole-missing H-PCFs), circular PCFs (C-PCF), square PCFs (S-PCF), and octagonal PCFs (O-PCF) is investigated through simulations. Results show that regardless of the cross section structures of the PCFs, the 1st ring air-hole diameter has the greatest influence on the dispersion curve followed by that of the 2nd ring. The 3rd ring diameter only affects the dispersion curve within longer wavelengths, whereas the 4th and 5th rings have almost no influence on the dispersion curve. The hole-to-hole pitch between rings changes the dispersion curve as a whole. Based on the simulation results, a procedure is proposed to design PCFs with ultra-flattened dispersion. Through the adjustment of air-hole diameters of the inner three rings and hole-to-hole pitch, a flattened dispersion of 0 +/- 0.5 ps/(nm.km) within a wavelength range of 1.239-2.083 mu m for 5-ring 1-hole-missing H-PCF, 1.248-1.992 mu m for 5-ring C-PCF, 1.237-2.21 mu m for 5-ring S-PCF, 1.149-1.926 mu m for 5-ring O-PCF, and 1.294-1.663 mu m for 7-hole-missing H-PCF is achieved.

Control of the Fabrication Parameters During the Fabrication of Photonic Crystal Fibers

Research on the fabrication of photonic crystal fiber

Effects of Draw Parameters on the Hole Structure of PCFs

Study on the Fabrication Techniques of Photonic Crystal Fiber and Pcf Based Structures

Controlling of interstitial air holes in photonic crystal fibers and their influence on fibers basic properties

Investigation On The Fabrication Of Photonic Crystal Fibre

Fabrication of two-mode photonic crystal fiber and its application in fiber sensor

Fabrication And Dispersion Measurement Of Photonic Crystal Fiber With Central Holes

Ultra-flattened chromatic dispersion control for circular photonic crystal fibers

An Efficient Method of Monitoring PCF Properties During the Fabrication Process

An efficient algorithm for modeling photonic crystal fibers

Fabrication and Investigation of Photonic Crystal Fiber with Flattened Dispersion and High Nonlinearity

Fabrication and Study on the Small-Core Index-Guiding Photonic Crystal Fiber

Design of Low-Confinement-Loss and Highly Birefringent Index-Guiding Photonic Crystal Fibers

Tailoring Confinement Losses of Photonic Crystal Fibers

Design and fabrication of large mode-field wide-frequency single-mode photonic crystal fibers

Optimization of polishing parameters for optical coupler based on side-polished photonic crystal fiber

Design Procedure for Photonic Crystal Fibers with Ultra-Flattened Chromatic Dispersion

Photonic crystal fibers tapering based on the conventional taper rig

Design of Ultrawideband Single-Polarization Single-Mode Photonic Crystal Fiber with Ultraflattened Dispersion

A Novel Design For Single-Polarization Single-Mode Photonic Crystal Fiber At 1550 Nm