Abstract:Anthraquinone dyes are very common and refractory pollutants in a wide variety of textile wastewaters and the treatments of these wastewaters have attracted much attention up to now. In this study, a novel enhanced membrane bioreactor (MBR) by internal micro-electrolysis (IE) was successfully applied for treatment of reactive brilliant blue X-BR dye wastewater owing to its high organic matter and nitrogen removal. The main interests were taken in exploring the effect of iron ions released from the IE on properties of biomass and membrane filtration. A hybrid MBR (HMBR) with iron ions fed and an iron controlled MBR (CMBR) were operated in parallel. The biomasses in various MBRs were characterized by sludge volume index (SVI), particle size distributions, concentration of the bound extracellular polymeric substance (EPS), and microscopic structure of the sludge flocs. The results demonstrated that alleviation of membrane fouling in HMBR for a long time was mainly caused by the improvement of settleability and compactability of flocs, as well as the increase in the particle size. As a skeleton frame of aggregations, bound EPS effectively enhanced the bioflocculation of small particles, which was beneficial in controlling membrane biofouling. However, in the last phase, membrane permeability in HMBR continued to drop and tended to be lower than that in CMBR, which mostly attributed to the severely inorganic fouling besides the negative impact of EPS on membrane filterability. Therefore, iron ions control was critical in operation of the enhanced IE/MBR system.

Dyeing and Printing Wastewater Treatment by Combined Coagulation-Mbr Technology

[Printing and Dyeing Wastewater Treatment Using Combined Process of Anaerobic Bioreactor and MBR].

Study on Dyeing and Printing Wastewater Treatment by a MBR Technology

EXPERIMENTAL STUDY ON DYEING WASTEWATER TREATMENT BY USING MBR-PHOTOCATALYSIS

PRESENT STATUS OF PROCESSING CONDITIONS OF MEMBRANE BIOREACTOR IN DYEING WASTEWATER TREATMENT

Treatment of Printing and Dyeing Wastewater by MBR-NF Process

Advanced Treatment of Dyeing Wastewater Towards Reuse by the Combined Fenton Oxidation and Membrane Bioreactor Process

Dyeing and Printing Wastewater Treatment Using a Membrane Bioreactor with a Gravity Drain

Dye Wastewater Treatment by a Combined Hydrolytic Acidification—Membrane Bioreaetor Processes

Enhanced Mbr by Internal Micro-Electrolysis for Degradation of Anthraquinone Dye Wastewater

Treatment of printing and dyeing wastewater using MBBR followed by membrane separation process

APPLICATION OF NEW SEAWEED MEMBRANE BIOREACTOR FOR DYEING WASTEWATER TREATMENT

Experimental study of advanced treatment of dyeing wastewater with MBR-RO process

Study on the treatment of simulated dyeing wastewater by the coupled UV oxidation and bio-augmented MBR process

Printing Wastewater Treatment by Combined Short Process of Anaerobic Membrane Bioreactor (AnMBR)-Sequencing Batch Reactor (SBR)

Performance of Combined Process of Anoxic Baffled Reactor-Biological Contact Oxidation Treating Printing and Dyeing Wastewater

Treatment Effect of Printing and Dveing Wastewater by Modified Filler Enhanced Combined MBR Process

Treatment of Printing and Dyeing Wastewater with Multi-Strain Bioaugmentation Process of SBR

Dye Wastewater Treatment by Using Ceramic Membrane Bioreactor

Treatment Of Printing And Dyeing Wastewater By A Submerged Double-Shaft Rotary Anaerobic Membrane Bioreactor

Treatment of Dyeing Wastewater by Combining Process