Abstract:In response to the shortcomings of concentrated stress, difficult forming, and short service life of commonly used honeycomb ceramic thermal storage materials with square lattice holes, the author has developed a new type of low stress honeycomb ceramic thermal storage material by studying the structure, forming mold, and extrusion forming material of the thermal storage body. The author introduced the changes in specific surface area and porosity of heat storage materials with different geometric structures, and analyzed and compared the structural characteristics of two types of heat storage materials, namely heat storage balls and honeycomb bodies, under the premise of equal heat storage capacity. The trajectory of air-flow in the heat storage chamber was simulated using CFD software, and the pressure loss and centerline velocity changes of different shapes of honeycomb were analyzed. The flow characteristics, pressure distribution, and heat transfer performance of gas inside different shapes of honeycomb were calculated. The experimental results showed that the closer to the circular shape, the smaller the pressure loss of the centerline. The larger the equivalent diameter, the smaller the resistance along the path. From the perspective of cold pressure loss alone, regular quadrilateral holes and regular circular holes are the best choices for the shape of honeycomb openings. The centerline velocity of the equilateral triangle hole is the largest, indicating that the smaller the equivalent diameter is, the greater the average velocity at the outlet is. The resistance along the path of the round hole is the smallest, the regular quadrilateral hole is slightly larger, and the pressure loss of the equilateral triangle hole is the largest, which exceeds the round hole by nearly 1/3. Taking into account factors such as heat storage, specific surface area, flow characteristics, and heat transfer characteristics, quadrilateral honeycomb cells are the best choice.

Research development of honeycomb ceramics regenerator

Research Progress in Removal of CO2 from Closed Spaces by Membrane Technology

Design and Modeling of a Honeycomb Ceramic Thermal Energy Storage for a Solar Thermal Air-Brayton Cycle System

Kinetics and Structural Optimization of Cobalt-Oxide Honeycomb Structures Based on Thermochemical Heat Storage

Experiment and Characterization of Dynamic Thermal Storage Characteristics of Porous Media Thermal Storage System

Current Research Status,Difficulties and New Strategy in Utilization of Low Grade Heat

Design and manufacturing of forming molds for thermal storage materials and analysis of their thermal storage structures

Review on the Research Progress of Three-Dimensional Honeycomb Carbon:P Roperties and Applications

Research Progress of CO2 Recovery and Capture by Membrane Technology

Application of solar energy techniques to water treatment and their research progress

Comparative Study on the Performance of Cordierite-Mullite and Industrial Paraffin Wax in Low-Temperature Energy Recovery

Building Energy-Saving Technology and its Application Based on Low Carbon Concept

Simulation and experimental study on honeycomb-ceramic thermal energy storage for solar thermal systems

Numerical Investigation on 3D Unsteady Fluid Flow and Heat Transfer in a Regenerator

Experimental Investigation on Solution Regeneration Performance and Coefficients in Full-Open System for Heat and Water Recovery of Flue Gas

Experimental, numerical and theoretical study on heat transfer in paper honeycomb structure

Thermochemical energy storage performances of Co 3 O 4 -based honeycombs with multi-scale composite pores

Review on Absorption Thermal Energy Storage Technologies

Study on the Hydrothermal Recovery Characteristics of Nano-Ceramic Membranes on Regenerative Gas

Applications and Performance Testing of High-temperature Ceramics for Heat Engine Components

Development of Self-Regenerative High Temperature Air Combustion Technology