Abstract:A high-sensitivity fiber-optic strain sensor, based on the Vernier effect and separated Fabry–Perot interferometers (FPIs), is proposed and experimentally demonstrated. One air-cavity FPI is used as a sensing FPI (SFPI) and another is used as a matched FPI (MFPI) to generate the Vernier effect. The two FPIs are connected by a fiber link but separated by a long section of single-mode fiber (SMF). The SFPI is fabricated by splicing a section of microfiber between two SMFs with a large lateral offset, and the MFPI is formed by a section of hollow-core fiber sandwiched between two SMFs. By using the Vernier effect, the strain sensitivity of the proposed sensor reaches <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\text{1.15 nm/}\mu \varepsilon $</tex-math></inline-formula> , which is the highest strain sensitivity of an FPI-based sensor reported so far. Owing to the separated structure of the proposed sensor, the MFPI can be isolated from the SFPI and the detection environment. Therefore, the MFPI is not affected by external physical quantities (such as strain and temperature) and thus has a very low temperature cross-sensitivity. The experimental results show that a low-temperature cross-sensitivity of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\text{0.056 } \mu \varepsilon /^ {\circ }{\text{C}}$</tex-math></inline-formula> can be obtained with the proposed sensor. With its advantages of simple fabrication, high strain sensitivity, and low-temperature cross-sensitivity, the proposed sensor has great application prospects in several fields.

Temperature-Insensitive Micro Fabry–PÉrot Strain Sensor Fabricated by Chemically Etching Er-Doped Fiber

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

Micro Fiber-Optic Fabry-Perot Interferometer Fabricated by Chemical Etching of Er-doped Fiber

An Fiber-Optic Micro Fabry-Prot Interferometric Sensor Based on Erbium-Doped Optical Fiber

Micro Extrinsic Fiber-Optic Fabry-Perot Interferometric Sensor Based on Erbium- and Boron-Doped Fibers

Micromachining of an In-Fiber Extrinsic Fabry-Perot Interferometric (MEFPI) Sensor by Using a Femtosecond Laser

High-sensitivity fiber-optic strain sensor based on the Vernier effect and separated Fabry—Perot interferometers

Hybrid Lpfg/Mefpi Sensor for Simultaneous Measurement of High-Temperature and Strain

Fiber-optic Fabry-Perot sensors take the strain under high temperature

High Sensitivity, Low Temperature-Crosstalk Strain Sensor Based on a Microsphere Embedded Fabry–Perot Interferometer

Highly Sensitive Strain Sensor Based on the Vernier Effect With High Extinction Ratio and Low-Temperature Cross-Sensitivity by Compact Double FPI

High-sensitivity Strain Sensor with an In-Fiber Air-Bubble Fabry-Perot Interferometer

Fabrication and Qualitative Analysis of an Optical Fibre EFPI-Based Temperature Sensor

High Sensitivity Fabry-Perot Interferometer Based on Offset Splicing Fibers and Vernier Effect for Strain Measurement

A Miniature Extrinsic Fabry-Pérot Interferometer Strain Sensor Based on Hollow-Core Photonic Crystal Fiber

Temperature-Strain Discrimination Sensor Using a WDM Chirped In-Fibre Bragg Grating and an Extrinsic Fabry-Pérot

Discrete amplified sensing of temperature and strain

A high-sensitivity temperature sensor based on liquid-infiltrated large lateral offset structure

Pcf-Based Fabry-Perot Interferometric Sensor For Strain Measurement Under High-Temperature

High Temperature Strain Sensor Based on In-Line Fabry-Perot Interferometer Formed by Hollow-Core Photonic Crystal Fiber

High temperature microstructured fiber sensor based on a partial-reflection-enabled intrinsic Fabry-Perot interferometer.