Abstract:It is relatively difficult to monitor the deformation of slope body in model test. To solve this problem, the optical fiber sensing technique is applied to slope model test. By constructing physical model for slope under artificial rainfall,the deformation in slope body can be monitored by optical fiber sensing technology of Brillouin optical time domain reflectometer(BOTDR);and the deformation on slope surface can be monitored by fiber Bragg grating(FBG). Regarding the fixed point on the model box as the reference point,the variations in slope body can be monitored by the optical fiber preburied in the different locations of slope;and the deformation on slope surface can be achieved by the FBG sensor set on the slope surface. According to the recorded data of deformations before,during and after rainfalls,it can be found that the deformation of slope is not obvious in initial period of rainfall,but as the time goes on,there is a sudden growth of the deformation in the slope body and surface. The part of the slope closer to the surface has the larger deformation,but the part at the bottom of the slope has the least deformation. The overall law is that the influence of rainfall on slope body diminishes gradually with increase of depth of slope body. That can explain why the homogeneous soil-slope′s failure induced by rainfall is easy to occur in shallow strata. In the slope surface,the maximum deformation appears in the trailing edge of slope,and the minimum one appears in the front edge. After the rainfall,a part of the deformations in the slope reduces to a lower value. The experimental result has proven that the optical fiber sensing technologies of BOTDR and FBG have many advantages in the monitoring of geotechnical engineering,and they can offer practical references and prospects on application.

SLOPE DEFORMATION CHARACTER ANALYSIS BASED ON MONITORING RESULTS OF MULTIPLE MULTI-POINT BOREHOLE EXTENSOMETER

Measurement on Soil Deformation and Numerical Simulation During Tunneling Process

Insights into the deformation and failure characteristic of a slope due to excavation through multi-field monitoring: a model test

Rock Slope Stability Analysis Based on Deformation Monitoring and Numerical Simulation

Analysis of Deformation Mechanism of Landslide in Complex Geological Conditions

Multi-Source Monitoring and Numerical Simulation Deformation on Highway Steep Slopes under Rainfall Effects

Analysis of Spatiotemporal Characteristics of Internal Deformation of Deep Excavated Expansive Soil Canal Slopes

APPLICATION OF OPTICAL FIBER SENSING TECHNOLOGY TO SLOPE MODEL TEST

Application of CCD Micro-Deformation Monitoring Technology to Slope Remote Monitoring

Optimal Deployment of Monitoring Points Considering Spatial Deformation Correlation of Slopes

Deformation and Reinforcement Monitoring Analysis of Tail Water Outlet Slope in a Hydropower Station

Study on evolutionary characteristics of toppling deformation of reverse-dip layered rock slope based on surface displacement monitoring data

Slope monitoring optimization considering three-dimensional deformation and failure characteristics using the strength reduction method: A case study

Valley Deformation and Slope Seismic Analysis Near Tail Water Outlet of a Hydropower Station

Synthetic Study Method of Dynamic Deformation Process of Landslide

A Case Study on the Application of 3D Scanning Technology in Deformation Monitoring of Slope Stabilization Structure

CURRENT STATUS AND NEW PROGRESS ON SLOPE DEFORMATION MONITORING TECHNOLOGIES

NUMERICAL ANALYSIS ON DEFORMATION AND STRESS OF HIGH SLOPE OF INTAKE AND INTERACTION OF DAM-SLOPE AND TUNNEL AT HUGE HYDROPOWER PROJECT

ANALYSIS ON THE STRAIN-FIELD OF SOIL CUT SLOPE BASED ON DFOS TECHNOLOGY MONITORING

Rapid assessment of slope deformation in 3D point cloud considering feature-based simplification and deformed area extraction

Monitoring of High Slope and the Foundation of Security Forecast Model