Abstract:Valve contained pipelines have witnessed a great growth and there exists a lot of noise caused by valves. Thick perforated plates are especially used is valve contained pipelines for the noise control, but there are limited literatures about its noise control performances under different structural parameter of thick perforated plates, which limits its popularization and application. In this paper, transmission loss (TL) predictions of various thick perforated plates are carried out to analyze the noise control performances. Finite element method (FEM) is implemented to simulate the acoustic response, and TL is achieved by the sound pressure of four points on both sides of the thick perforated plates. Adopted numerical method shows good agreements with the existing research works and the results indicate that reducing the margin of the plates can enhance TL of some frequencies. Similar to chamber mufflers, the maximum TL depends on the area ratio and the frequency range with the best noise control performance is related to the plate thickness. Meanwhile, the low velocity flow does not affect the TL curve so much and in the situation of supersonic flow, and the TL curve turns into a periodic shape, which may weaken the effects of noise control. Besides, based on the analytical solution of TL for the chamber muffler, a linear correction formula of maximum TL is proposed for the thick perforated plate. This work can give several advices for similar perforated plates design works and someone who are dealing with decreasing the noise effects from the valves in pipelines. (C) 2015 Elsevier Ltd. All rights reserved.

Pre-Reducing the Intermittent Exhaust Noise by Optimizing the Exhaust Pipeline at the Design Stage

Experimental study on performance of various mufflers for intermittent exhaust noise reduction

Study on the Identification of Noise Sources and Reducing Noise for Diesel Engine

Experimental Study on Noise Reduction Effect of a Muffler Inserted in Liquid Transporting Pipeline

Sensitivity analysis and noise reduction optimization design of the insert-pipe double expansion chamber muffler

Optimization of Valve Opening Process for the Suppression of Impulse Exhaust Noise

Numerical simulation and test validation for performance of a muffler in an exhaust pipe

Experimental Research on Acoustic Performance Optimization for Intake System

An Integrated Passive and Active Control System for Reducing Haul Truck Noise

A Study on Noise Reduction of Gear Pumps of Wheel Loaders Based on the ICA Model

Transmission Loss Analysis of Thick Perforated Plates for Valve Contained Pipelines

Numerical and Experimental Studies on Housing Optimization for Noise Reduction of an Axial Piston Pump

Rectangular-Pulse Method Based on Simulation and Experiment of Acoustic Performance of Perforated Intake Pipe

The Reduction of Air-Rush Noise in Plastic Engine Intake Manifolds

Noise Pollution Reduction Through a Novel Optimization Procedure in Passive Control Methods

Numerical and Experimental Studies on Aerodynamic Characteristics of Pneumatic Exhaust with Perforated Panel Muffler

A New Design Method for the Transition Region of the Valve Plate for an Axial Piston Pump

Study on Acoustical Properties of Sintered Bronze Porous Material for Transient Exhaust Noise of Pneumatic System

Multi-objective optimization of muffler for vehicle air-conditioning compressor pipeline

Coupled optimization of internal combustion engine radiated noise and interior noise

Reduction of Radiated Noise from Rotary Compressors by Acoustic Interference Effects