Abstract:In this work, based on the thermodynamic prediction, the comprehensive studies of the influence of Cu for Fe substitution on the crystal structure and magnetic properties of the rapidly quenched Fe85B15 alloy in the ribbon form are performed. Using thermodynamic calculations, the parabolic shape dependence of the ΔGamoprh with a minimum value at 0.6% of Cu was predicted. The ΔGamoprh from the Cu content dependence shape is also asymmetric, and, for Cu = 0% and Cu = 1.5%, the same ΔGamoprh value is observed. The heat treatment optimization process of all alloys showed that the least lossy (with a minimum value of core power losses) is the nanocomposite state of nanocrystals immersed in an amorphous matrix obtained by annealing in the temperature range of 300-330 °C for 20 min. The minimum value of core power losses P10/50 (core power losses at 1T@50Hz) of optimally annealed Fe85-xCuxB15 x = 0,0.6,1.2% alloys come from completely different crystallization states of nanocomposite materials, but it strongly correlates with Cu content and, thus, a number of nucleation sites. The TEM observations showed that, for the Cu-free alloy, the least lossy crystal structure is related to 2-3 nm short-ordered clusters; for the Cu = 0.6% alloy, only the limited value of several α-Fe nanograins are found, while for the Cu-rich alloy with Cu = 1.2%, the average diameter of nanograins is about 26 nm, and they are randomly distributed in the amorphous matrix. The only high number of nucleation sites in the Cu = 1.2% alloy allows for a sufficient level of grains' coarsening of the α-Fe phase that strongly enhances the ferromagnetic exchange between the α-Fe nanocrystals, which is clearly seen with the increasing value of saturation induction up to 1.7T. The air-annealing process tested on studied alloys for optimal annealing conditions proves the possibility of its use for this type of material.

The atomic structure of Fe100-xCux nanoalloys: X-ray absorption analysis

Local Structure Of Fe100-Xcux Nanoalloys From The Analysis Of Their X-Ray Absorption Spectra

Structural Studies of Nanometeric Fe100-xCux Alloys

Theoretical Studies on Near-Edge X-Ray Absorption Fine Structure of (So+2o)/cu(100)

LOCAL STRUCTURES OF MECHANICALLY ALLOYED Fe100-xCux SOLID SOLUTIONS STUDIED BY X-RAY ABSORPTION FINE STRUCTURE

Electronic Structure of the Fe–Cu–Nb–Si–B Alloys by X-Ray Absorption Spectroscopy

Mechanical Alloying, Fine Structure and Thermal Decomposition of Nanocrystalline Fcc-Fe60cu40

Improvement in Structural and Magnetic Properties of Electrospun Ni&lt;sub&gt;1-x&lt;/sub&gt;Cu&lt;sub&gt;x&lt;/sub&gt;Fe&lt;sub&gt;2&lt;/sub&gt;O&lt;sub&gt;4&lt;/sub&gt; Nanofibers

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Electronic Structure of Nanoscale Cu/Pt Alloys: A Combined X-Ray Diffraction and X-Ray Absorption Investigations

Local Structures Of Mechanically Alloyed Al70cu20fe10 Nanocomposites Studied By Xrd And Xafs

Local Structure Around Co in (zn, Co)O Nanoparticles

Structural study on Co-Ni bimetallic nanoparticles by X-ray spectroscopy

Structure and Bonding in Amorphous Cr1-xCx Nanocomposite Thin Films: X-ray Absorption Spectra and First-Principles Calculation

Local Structures Around Co Atoms in Wurtzite Zno Nano-Composites Probed by Fluorescence Xafs

Structure and Magnetic Properties of Thermodynamically Predicted Rapidly Quenched Fe85-xCuxB15 Alloys

Local structural order around dopant atoms in Fe- and Co-doped ternary alloys based on γ′-Ni3Al

O nanostructure studied by XAFS

Structural Transition of Fe80Cu20 Alloy Induced by Annealing

Atomic-scale Chemical Imaging and Quantification of Metallic Alloy Structures by Energy-Dispersive X-ray Spectroscopy

Structure and bonding in amorphous iron carbide thin films