Abstract:A new method for online measurement of pulp Kappa number by means of near infrared diffuse reflectance spectroscopy and support vector machine (SVM) modeling has been developed in this paper. The near infrared diffuse reflectance spectroscopy of 45 Chinese red pine wood pulp samples was acquired. Selecting the absorption rates in 15 vibration absorption peaks of each sample and using dynamic independent component analysis (DICA) to distill the characters of input sample data, the pulp Kappa number predictive model based on SVM was built. From the whole 45 samples, 35 samples was selected to be the calibration set, and the predictive set consisted of the other 10 samples was used to validate the the pulp Kappa number predictive model. The external validation standard deviation is 0.26 for pulp Kappa number predictive model based on SVM, and the determining factor is 0.93 for the model. The internal cross validation standard deviation is 0.22 for pulp Kappa number predictive model based on SVM, and the determining factor is 0.96 for the model. To analyze the effectiveness of SVM method used to build the pulp Kappa number predictive model, the pulp Kappa number predictive model based on linear regression (LR) was also established. The external validation standard deviation is 0.45 for the model based on linear regression (LR), and the determining factor is 0.81 for the model. The internal cross validation standard deviation is 0.41 for the model based on linear regression (LR), and the determining factor is 0.85 for the model. For the 10 test samples, the pulp Kappa number predictive model based on Linear regression (LR) and the model based on SVM all have certain predictive accuracy, but the later higher. The experiment results not only show the feasibility and effectiveness of the near infrared measurement method for pulp Kappa number, but also validate that the pulp Kappa number predictive model based on SVM is more accurate and robust than linear regression model.

A New Prediction Model for Pulp Kappa Number in Eucalyptus Kraft Pulping

Monitoring the kappa number of bleached pulps based on FT-Raman spectroscopy

[The Online Measurement for Pulp Kappa Number Based on Near Infrared Spectroscopy and Support Vector Machine].

Study and System Design of Dynamic Optimization Mathematical Model of Paper Pulp Produce and Cost

Optimization of Batch Cooking Parameters Based on SVM and Genetic Algorithm

Prediction of holocellulose and lignin content of pulp wood feedstock using near infrared spectroscopy and variable selection

The prediction of effective thermal conductivities perpendicular to the fibres of wood using a fractal model and an improved transient measurement technique

Research Development of Numerical Stimulation in Paper-pulp Pump

Fractal model for predicting effective thermal conductivity perpendicular to fibres of wood

Regression modelling strategies for projected and sustainable kraft pulping of wheat straw

Relationship between the Change in E/T Ratio and the Cooking Performance of Eucalyptus and Acacia Woods during Kraft Pulping Process

Potential of NIR spectroscopy for predicting cellulose nanofibril quality in commercial bleached Kraft pulp of Eucalyptus

Dynamic Models for Alkaline Degreasing of Mongolia Scotch Pine Veneer

Addition of green and black liquor in kraft pulping of Eucalyptus dunnii wood: possible solutions for the problems with kraft pulping caused by high calcium content

A Statistical Model To Evaluate Fiber Bending Flexibility

Machine learning prediction of lignin content in poplar with Raman spectroscopy

Interpretable GHG Emission Prediction for Papermaking Wastewater Treatment Process with Deep Learning

Performance prediction method based on Liang-Kleeman information flow and wood tracheid morphology

Eucalyptus Pulp Fibers with In-Situ Precipitated Calcium Carbonate – A 12-Inch Laboratory Paper Machine Study

Kinetics of Strong Acid Hydrolysis of a Bleached Kraft Pulp for Producing Cellulose Nanocrystals (Cncs)

A model transfer strategy based on screening stable wavelength for quantitative analysis of holocellulose and lignin content distribution in pulpwood