Abstract:In this research, detailed characteristics of diesel spray and atomization based on marine engine scale have been studied under subcritical, transcritical and supercritical conditions. A large constant volume chamber with an inner diameter of 300 mm and a 300 pm single-nozzle injector are used to mimic the in-cylinder thermodynamic condition of marine diesel engine. Sub/trans/supercritical conditions are composed of nine cases by means of different diesel phase transition regions. Optical diagnostic measurements are conducted through backlight illumination technology and schlieren imaging technology in an inert atmosphere. The images are processed with multi-threshold technique to obtain quantitative spray parameters, such as jet and liquid penetrations, averaged lengths, liquid steady time, spray cone angles and R-parameter. Moreover, some new finding about the structure of spray under supercritical condition is also discussed. The results show that the spray liquid periphery is quite smooth and stable with shorter penetration under supercritical condition, meanwhile, the jet of spray behaves as thinner periphery near the injector nozzle region and shows lower density at downstream region. Higher ambient pressure produces a negative effect on the increase of the tip velocity and development of spray. With the transition from transcritical condition to supercritical condition, the liquid length decreases by 32 mm and there exists an obvious decrease of 35 mm from jet length to liquid length. A trade-off relationship between the jet cone angle and jet penetration is also found. Generally, this work is helpful to understand the detailed process of diesel atomization under transcritical and supercritical conditions.

Study of Spray Characteristics Based on a Line X-Ray Phase Contrast Imaging Technique

Measurement of Nozzle Geometry with X-Ray Phase Contrast Imaging Technique

Research Progress of the Measurements of Diesel Spray Characteristics

Research on Visulization of Cavitation in Spraying of Diesel Engine

The study of near field in diesel spray based on ballistic imaging

Investigation on flash boiling spray fluctuations in the near-field and far-field under gasoline direct injection related conditions

Quantitative Characterization of Near-Field Fuel Sprays by Multi-Orifice Direct Injection Using Ultrafast X-Tomography Technique

Visualization of internal structure of fuel spray using laser computed tomography technique (2). Applied to diesel spray

Research on Nozzle Geometry Measurement with Synchrotron Radiation X-Ray Phase Contrast Imaging Technique

Experimental Study on Spray and Atomization Characteristics under Subcritical, Transcritical and Supercritical Conditions of Marine Diesel Engine

Experimental Study on Spray Characteristic of Diesel Fuel by Digital Particle Image Velocimetry

A Review of Engine Fuel Injection Studies Using Synchrotron Radiation X-ray Imaging

Determination of Diesel Spray Axial Velocity Using X-Ray Radiography

Characterization of Direct-Injection Gasoline Sprays under Different Ambient and Fuel Injection Conditions

Quantitative Analysis on Liquid Penetration of Evaporating Diesel Sprays

Study of Aeroengine Nozzle Spray Characteristics Based on Image Recognition Techniques

Phosphorescent Imaging Technique on Simultaneous Measurements of Spray Flows in Heated Air

Ultrafast and Quantitative X-Tomography and Simulation of Hollow-Cone Gasoline Direct-Injection Sprays

Gasoline spray characteristics using a high pressure common rail diesel injection system by the method of laser induced exciplex fluorescence

An Experimental Study on the Spray and Thermal Characteristics of R134a Two-Phase Flashing Spray

Spray Dynamics of High Pressure Fuel Injectors for DI Gasoline Engines