Abstract:In this paper, the MP-PIC (multiphase particle-in-cell) approach is used for three-dimensional (3D) modeling of the gas-solid flows in two types of circulating fluidized bed (CFB) risers with Geldart group A and B particles by incorporating the homogeneous and heterogeneous drag force models in the MP-PIC method, respectively. First, the effects of the three important simulation parameters, namely, the grid cell number, numerical particle-parcel size and time step, are investigated. Having determined the appropriate values for the three parameters, the hydrodynamic characteristics predicted by different drag force models are rigorously analyzed. The homogeneous drag models considered are the six models, the Wen-Yu, Wenyu-Ergun, Syamlal-O'Brien, Gidaspow, HKL, and BVK models, while the four heterogeneous models considered are Sarkar and EMMS-based models (EMMS-Yang, EMMS-Matrix and EMMS-QL). For the riser 1 with the Geldart A particles, all the six homogeneous models predict extremely high solid fluxes and inconsistent void fraction distributions compared with experimental results. The heterogeneous Sarkar and EMMS-based models can effectively improve the simulation accuracy and predict a typical core-annulus flow structure. The lately-developed EMMS-QL model produces the most accurate solid flux. For the riser 2 with the Geldart B particles, both the heterogeneous and homogeneous drag force models can predict a reasonable flow structure. Further, there are no significant differences in the void fraction and velocity profiles due to the choice of a drag force model over the other. These drag force models also successfully capture the meso-scale local particle clusters. Of these drag-force models, the Wenyu-Ergun drag-forec model predicts comparatively accurate solid flux. Generally, MP-PIC combined with heterogeneous Sarkar and EMMS-based drag force models reasonably improve the simulation accuracy for the Geldart A particles, while these heterogeneous models have no superiority over the homogeneous drag models for the Geldart B particles. (C) 2018 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan. All rights reserved.

THE REVISED DRAG FORCE MODEL FOR THE DENSE CFB RISER AND THE EXPERIMENTAL VALIDATION

Development and Validation of Filtered Drag Models for Fluidization of Low-Density Geldart A Particles

Modeling of Drag with the Eulerian Approach and EMMS Theory for Heterogeneous Dense Gas–solid Two-Phase Flow

Revised Drag Calculation Method for Coarse Grid Lagrangian–Eulerian Simulation of Gas–solid Bubbling Fluidized Bed

An Assessment of Drag Models in Eulerian–Eulerian CFD Simulation of Gas–Solid Flow Hydrodynamics in Circulating Fluidized Bed Riser

Improvement of EMMS Drag Model for Heterogeneous Gas–solid Flows Based on Cluster Modeling

A generalized drag Law for heterogeneous gas-solid flows in fluidized beds

Hydrodynamics of Gas–solid Risers Using Cluster Structure-Dependent Drag Model

Effects of Gas-Solid Drag Model on Eulerian-Eulerian CFD Simulation of Coal Combustion in a Circulating Fluidized Bed

Hydromechanical Simulation of A Bubbling Fluidized Bed Using an Extended Bubble-Based Emms Model

Drag Models for Simulating Gas-Solid Flow in the Turbulent Fluidization of FCC Particles

MP-PIC Modeling of CFB Risers with Homogeneous and Heterogeneous Drag Models

Comparative analysis on gas–solid drag models in MFIX-DEM simulations of bubbling fluidized bed

A CFD study of a bi-disperse gas–solid fluidized bed: Effect of the EMMS sub grid drag correction

Numerical Simulation of Particulate Flows in CFB Riser with Drag Corrections Based on Particle Distribution Characterization

Experimental study and transient CFD/DEM simulation in a fluidized bed based on different drag models

Cfd Simulation of Internal-Loop Airlift Reactor Using Emms Drag Model

Comparative Study of Two Fluid Model and Dense Discrete Phase Model for Simulations of Gas–solid Hydrodynamics in Circulating Fluidized Beds

Modifying the Inter‐phase Drag Via Solid Volume Fraction Gradient for CFD Simulation of Fast Fluidized Beds

Research on the Generalization Issue of the Heterogeneous QC-EMMS Drag Model for Gas-Solid Fluidization

Modeling of Cluster Structure-Dependent Drag with Eulerian Approach for Circulating Fluidized Beds