Abstract:A novel Eulerian–Lagrangian approach based on the multi-phase particle-in-cell (MP-PIC) methodology was applied in the simulation of the hydrodynamic behavior of pressurized high-flux circulating fluidized beds (DHFCFBs) in this work. The sensitivities of key model (i.e. the drag model) and modeling parameters (particle–particle restitution coefficient, normal particle–wall restitution coefficient, and tangential particle–wall restitution coefficient) on the predictions have been tested systematically. Experimental results of Richtberg et al. [Powder Technol. 2005, 155(2), 145–152] and Yin et al. [Chem. Eng. Technol. 2012, 35(5), 904–910] were used as a numerical benchmark to assess the simulations quantitatively. The results show that the Gidaspow drag model displays better agreement with both the axial profiles of pressure drop and the radial distributions of particle volume fraction. Compared with the perfectly elastic particle collision (ep=1.0), the non-ideal particle–particle interaction could get more reasonable prediction results. The particle–wall restitution coefficient has somewhat of an effect on the simulated gas–solid flow behaviors in the risers. However, no critical changes of simulated flow characteristic in the trends of pressure drop and solid volume fraction distribution have been found. Based on the comparison of simulation results with experiments, a suitable model (i.e., Gidaspow drag model) and a group of modeling parameters, namely a particle–particle restitution coefficient (ep=0.9), a normal particle–wall restitution coefficient (ewn=0.1) and a free-slip boundary condition (i.e. the tangential particle–wall restitution coefficient, ewτ=1.0) for modeling the hydrodynamic behavior in the DHFCDB riser were determined and verified.

Modeling of Cluster Structure-Dependent Drag with Eulerian Approach for Circulating Fluidized Beds

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Steady-state Simulation of Core-Annulus Flow in a Circulating Fluidized Bed (CFB) Riser

A dynamic cluster structure-dependent drag coefficient model applied to the riser in high density circulating fluidized bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

CFD Simulation and Hydrodynamics Characterization of Solids Oscillation Behavior in a Circulating Fluidized Bed with Sweeping Bend Return

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Clusters intermittent simulations using dynamic cluster structure-dependent drag model in gas-particles risers

Modeling of Drag with the Eulerian Approach and EMMS Theory for Heterogeneous Dense Gas–solid Two-Phase Flow

Numerical Simulation of Particulate Flows in CFB Riser with Drag Corrections Based on Particle Distribution Characterization

An Assessment of Drag Models in Eulerian–Eulerian CFD Simulation of Gas–Solid Flow Hydrodynamics in Circulating Fluidized Bed Riser

Two-Fluid Model Simulations of the National Energy Technology Laboratory Bubbling Fluidized Bed Challenge Problem

Improvement of EMMS Drag Model for Heterogeneous Gas–solid Flows Based on Cluster Modeling

CFD-DEM Simulation of Clustering Phenomena in Riser and Downer

Modeling on the Hydrodynamics of Pressurized High-Flux Circulating Fluidized Beds (phfcfbs) by Eulerian–Lagrangian Approach

Eulerian-Lagrangian Simulation of Distinct Clustering Phenomena and Rtds in Riser and Downer

Improving Solid-Phase Fluidization Prediction in Circulating Fluidized Bed Risers: Drag Model Sensitivity and Turbulence Modeling

An approach for drag correction based on the local heterogeneity for gas–solid flows

Numerical Simulation and Experimental Study of the Gas–Solid Flow Behavior Inside a Full-Loop Circulating Fluidized Bed: Evaluation of Different Drag Models

Numerical Study of Gas–solid Flow in a Coal Beneficiation Fluidized Bed Using Kinetic Theory of Granular Flow