Abstract:Wet friction clutch is the key functional component of the high-speed helicopter variable-speed transmission system, which is used to change the power transmission path. In the engagement process of wet friction clutch, the driving/driven disc will produce drag torque under the shearing of lubricating oil, which reduces the transmission efficiency. This unnecessary drag torque reduces efficiency and increases clutch temperature. The temperature increase promotes the wear of gears and bearings and the aging deformation of friction plates, which leads to local wear and reduces the service life of the clutch. From the principle of wet friction clutch, the oil groove structure is directly related to the drag torque and the temperature rise of friction disc. It is very important for the long-distance flight and service life of high-speed helicopters to obtain the groove structure with low drag torque and low temperature rise. In order to solve this problem, taking the wet friction clutch of a high-speed helicopter as the research object, based on the radial and annular compound groove, the thermal-fluid-solid coupling simulation model of the wet friction clutch is established to obtained the flow characteristics and temperature field distribution of the lubricating oil in the friction disc oil groove, and to analyze the influence law of the oil groove structure parameters on the drag torque and temperature field. In order to improve the transmission efficiency and the service life of friction disc, Taguchi experiment and non-dominated neighborhood immune algorithm were used to optimize the structural parameters of the oil grooves. The comparison results show that the optimized structural can effectively reduce the drag torque and the temperature rise. This work can provide a theoretical reference for the structure design of a wet friction clutch.

3-D Flow Analysis of Oil Channel in Wet Multi-disc Friction Clutch

Experimental and Theoretical Analysis of the Drag Torque in Wet Clutches

Analysis on the oil film uniformity of hydro-viscous drive friction pairs

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

Design and characteristic of lubricating oil chamber of hydro-viscous drive clutch

Parametric Analysis of the Drag Torque Model of Wet Multi-Plate Friction Clutch with Groove Consideration

Simulation Research on the Drag Torque of Disengaged Wet Clutches

Laminar Flow in the Gap Between Two Rotating Parallel Frictional Plates in Hydro-Viscous Drive

Effects of Oil Channels and Oil Flow Rate on Cooling Performance of Closed Circuit Axial Piston Transmission

Research of Flow Field Simulation for Lubrication System and Effect Evaluation on a 7-Speed Dual Clutch Transmission

Numerical investigation of cavitation effect on two-phase oil film flow between a friction pair in hydro-viscous drive

Research on Flow Characteristics of Air-oil Two Phase Annular Flow for Oil-air Lubrication

Lubrication and stability analysis of nonlinear rotor-bearing system

Influence of Nozzle Structure on the Two-phase Flow Characteristic in Oil-air Lubrication System for High-speed Rolling Bearing

Thermal-Fluid-Solid Coupling Simulation and Oil Groove Structure Optimization of Wet Friction Clutch for High-Speed Helicopter

An Analysis on the Thermoelastic Instability of Wet Multi-disc Clutch

Analysis for the Fluctuation Characteristics of Annular Flow in the Oil-Air Lubrication System

The Influence of Oil Film Thickness on the Gear Impact Dynamics of Friction Disc

Analytical simulation of influential parameters affecting grooved wet clutches performance underdisengagement condition

Analysis of Air–Oil Flow and Heat Transfer inside a Grooved Rotating-Disk System

Sliding State Analysis of Fractal Rough Interface Based on the Finite Element Method