Abstract:This study provides an analysis of the phosphorus adsorption efficacy of three modified drinking water treatment residues (MDWTRs): MDWTR-P (powdered form), MDWTR-D2, and MDWTR-D5 (alginate bead-entrapped forms with bead diameters of 2 mm and 5 mm, respectively). The preparation process involved washing and drying the drinking water treatment residue, followed by grinding and sieving to achieve particle sizes below 90 μm. The residue was then incinerated at 600 °C in oxygen-limited conditions. Subsequently, the MDWTR was formulated into alginate beads by mixing with sodium alginate and FeCl3 solutions, resulting in spherical particles of specified diameters. The evaluation of surface area, pore volume, pore size, and CHN concentration revealed that MDWTR-D5 possesses the largest surface area (284.7 m2 g-1) and highest micropore volume (0.04 cm3 g-1), indicating a greater capacity for adsorption. SEM-EDS analysis demonstrated significant compositional changes post-treatment, particularly elevated phosphorus levels, confirming effective adsorption. Metal content analysis indicated high aluminum levels in MDWTR-P and increased iron content in MDWTR-D5. Toxicity Characteristic Leaching Procedure (TCLP) and in vitro bioaccessibility (IVBA) tests confirmed the non-hazardous nature of all MDWTRs, ensuring their safety for environmental applications. Kinetic analyses using pseudo-first-order, pseudo-second-order, and intraparticle diffusion models highlighted the superior performance of MDWTR-D5, with the highest equilibrium adsorption capacity and initial adsorption rate across all tested concentrations, suggesting both high efficiency and rapid adsorption potential. Further validation using Langmuir and Freundlich isotherms revealed MDWTR-D5's highest monolayer adsorption capacity (22.88 mg g-1) and Freundlich adsorption capacity parameter (6.97 mg g-1). Statistical analysis via one-way ANOVA confirmed significant differences in phosphorus concentrations among the MDWTRs samples (p-value <0.001), consistently underscoring MDWTR-D5's superior adsorption performance. These findings highlight MDWTR-D5's potential as an effective adsorbent for phosphorus removal in wastewater treatment, emphasizing its applicability in environmental remediation strategies.

Adsorption Performance of Trace Phosphorus Removal by Modified Active Aluminum Oxide

Alkali-Treated Yttrium-Containing Chitosan-Based Hydrogel Beads for Phosphate Removal from Aqueous Solutions

Alkali-treated Yttrium-Containing Chitosan-Based Hydrogels for Phosphate Recover with Highly Selective in Wide Ph Aqueous Solution

Synthesis of Al-Modified Hydrochar from Corn Stover for Efficient Phosphate Removal

Phosphorus Adsorption Characteristics of Alum Sludge: Adsorption Capacity and the Forms of Phosphorus Retained in Alum Sludge

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

Equilibrium and Kinetics Studies of Phosphate Removal from Solution Onto a Hydrothermally Modified Al-Si-Fe-Ca Composite Adsorbent

La-MOFs in situ loaded Al2O3 particles for effective removal of phosphate in water: characterization, application potential analysis, and mechanism

Removal of Phosphorus from Wastewater by Different Morphological Alumina

Enhanced phosphate removal with fine activated alumina synthesized from a sodium aluminate solution: performance and mechanism

Tuning adsorption capacity of metal–organic frameworks with Al3+ for phosphorus removal: Kinetics, isotherm and regeneration

Enhanced phosphate adsorption studies on several metal-modified aluminum sludge: preparation optimization, adsorption behavior, and mechanistic insight

Zirconium-modified biochar as the efficient adsorbent for low-concentration phosphate: performance and mechanism

Modification of palygorskites by alkali-acid and the effect of the phosphorus removal

Efficient removal of nitrogen and phosphorus in aqueous solutions using modified water treatment residuals–sodium alginate beads

Enhanced phosphorus adsorption using modified drinking water treatment residues: A comparative analysis of powder and alginate bead forms

Phosphate and Ammonium Adsorption Removal from Wastewater by Modiifed Attapulgite

Speciation matching mechanisms between orthophosphate and aluminum species during advanced P removal process.

Development of a Polyaluminum Ferric Titanium Chloride for Phosphorous Removal in Water

Adsorptive removal of phosphate by a nanostructured Fe-Al-Mn trimetal oxide adsorbent

Performance and mechanism of phosphorus adsorption removal from wastewater by a Ce-Zr-Al composite adsorbent