Abstract:HVDC is an important part of reducing energy transmission losses and maintaining energy sustainability. Commutation failure is the most common fault in HVDC systems, but existing commutation failure analysis approaches for HVDC systems do not consider the effects of instantly increasing direct current on the turn-off angle after an asymmetric fault in the AC system. To address this problem, we developed a commutation failure analysis approach that considers instantaneous variation of the DC current and AC voltage after asymmetrical faults. Firstly, the effects of the AC voltage and the DC current on the turn-off angle and the coupling relationship between the two are analyzed. Secondly, an equivalent mathematical model of the DC line, which covers the reactance, is built in Laplace space. Combined with the phase angle offset generated by the voltage after an asymmetric fault, a single relation expression containing only the AC voltage and turn-off angle is obtained by decoupling the DC current and AC voltage. The critical instantaneous AC voltage leading to system commutation failure is then derived based on the critical turn-off angle. Lastly, based on the CIGRE HVDC model built in the PSCAD electromagnetic transient simulation software (PSCAD v46), the accuracy of the proposed commutation failure analysis method compared with the other two methods is verified via simulation experiments under different grounding impedance values, and the applicability of the proposed method is further verified using simulation experiments with different smoothing reactor parameters.

Study On The Impedance-Frequency Characteristic Of Hvdc Converter Under Asymmetric Faults In The Ac System

Simulation On Power Characteristic Of Uhvdc During Commutation Failure And Dc Block

HVDC converter modeling and harmonic calculation under asymmetric faults in the AC system

Modeling of the HVDC convertor using dynamic phasor under asymmetric faults in the AC system

A Recovery Method for HVDC Systems Following AC System Faults

LCC-HVDC System Dynamic Phasor Modeling Based on Improved Switch Function

HVDC System Equivalent Model and Harmonic Calculation with DC Control System Characteristics Taken into Account

DC System Modeling and AC/DC System Harmonic Calculation under Asymmetric Faults

An Analysis and Calculation Method of Harmonic Interaction Between AC and DC System under Asymmetric Operating Conditions

Cascaded H7 Current Source Converter Based Power Transmission System And Fault Analysis

Analysis of Fault Characteristics of Converter in VSC-HVDC

Fault Calculation of AC System Interconnected by HVDC System

Dynamic Phasor Model of Line Commutated Converter Under Unbalanced Conditions

Dynamic Phasor Model of the Converter of the AC/DC System

Analysis of Asymmetric Fault Commutation Failure in HVDC System Considering Instantaneous Variation of DC Current

Study on steady-state fault model of the ac-dc hybrid system

A Fault Traveling-Wave Calculation Method for Hybrid HVDC Grids

Research on power transmission enhancement strategy of LCC-MMC hybrid HVDC system under AC symmetric fault

Analysis on Commutation Failure of AC Fault on HVDC System

Research on dynamic characteristics of inverter when fault occurs in HVDC receiving end equipped with synchronous condenser

Steady-state Model of Converter for Fault Analysis in the AC-DC Hybrid Systems