Abstract:AC fault disturbance will lead to commutation failure (CF) of LCC-HVDC, which may threaten the security and stability operation of the sending and receiving AC systems. Previous studies have focused on the commutation failure of inverters caused by voltage sags caused by receiving-end AC system faults. Different from the previous studies, this paper comprehensively analyzes the commutation failure mechanism of the inverter caused by a three-phase symmetrical grounding fault at different HVDC sending terminals. Firstly, based on the actual HVDC transmission system parameters, a simulation model is established in the electromagnetic transient simulation platform Hypersim, and the phenomenon of inverter commutation failure caused by sending-end fault is simulated and verified. Secondly, different from the qualitative analysis method used in the past to explain the reasons for CF, the dominant factors that lead to inverter CF under different control modes are investigated by quantitative analysis. In the case of control mode 1, the main reason for CF is that the inverter commutation voltage drops beyond the critical value. In the case of control mode 2, the decrease of the inverter advance angle will increase the risk of inverter CF. At the same time, through the analysis of the relevant electrical quantities before CF, the excessive DC current in the system recovery stage is the root cause of the above phenomenon. On these bases, A control strategy is proposed to suppress the commutation failure caused by the fault at the sending end by adjusting the trigger angle of the rectifier. Electromagnetic transient simulation results show that the proposed control strategy can effectively inhibit CF.

Feasibility Analysis of Single-end Equivalent Modeling to LCC-HVDC Transimission System

LCC-HVDC System Dynamic Phasor Modeling Based on Improved Switch Function

Commutation Overlap Characteristic Modeling and Stability Analysis of LCC-HVDC in Sending AC Grid

Efficient Approach for Commutation Failure Immunity Level Assessment in Hybrid Multi-Infeed HVDC Systems

Electromechanical Transient Modeling of Line Commutated Converter-Modular Multilevel Converter-Based Hybrid Multi-Terminal High Voltage Direct Current Transmission Systems

Analysis and suppression of LCC-HVDC inverter commutation failure caused by sending end faults

Evaluation Approach and Controller Design Guidelines for Subsequent Commutation Failure in Hybrid Multi-Infeed HVDC System

Combined Simulation Based Commutation Failure Analysis in Hvdc Systems

Analysis On Commutation Failure Caused By Ac Faults In Multi-Infeed Hvdc Systems

Commutation Failure analysis in single- and multi-infeed HVDC systems

Modified Average‐value Model for High‐performance Fault Transient Simulation of AC‐DC Hybrid Power Networks

HVDC System Equivalent Model and Harmonic Calculation with DC Control System Characteristics Taken into Account

Simulative Analysis on Factors Impacting Commutation Failure in Multi-Terminal HVDC Transmission System

Analysis of Commutation Failure in Multi-Infeed HVDC System under Different Load Models

Commutation Failure of Multi - Infeed HVDC Transmission System with FCC

A Novel HVDC Electromagnetic Transient Model for Transient Simulation of DC Feed-in Grid

Effectiveness Analysis of Evaluating Continuous Commutation Failure with Short Circuit Ratio

HVDC Electromechanical Transient Model and Comparison with HVDC Electromagnetic Transient Model

Analysis of Coupling Effect on LCC-MCC Hybrid HVDC from Parallel AC Lines in Close Proximity

An engineering applicable dynamic equivalent method for large-scale AC system connected to VSC-HVDC

Measures inhibiting follow-up commutation failures in multi-infeed HVDC system