Abstract:Automatic wafer prealignment is an important process in wafer manufacturing, whereby its flat edge is set at a predefined angle and its center is set in a predefined position; translational and rotational movement compensate for deviation of the wafer. However, as the traditional wafer prealignment algorithm depends on marked templates at the training stage when the type of wafer is changed, the templates need to be retrained. This paper proposes a new wafer prealignment algorithm, based on Fourier transform for orientation prealignment and least square regression for position prealignment, which will automatically adapt to different types of wafers in 2-D space. Results from experiments with the proposed algorithm on a laser-scribing machine using two types of wafer show that the orientation prealignment achieved an accuracy of 0.05 degrees, the position prealignment achieved an accuracy of 5 pixels, and the average operation time was approximately 1.5 s. As prealignment algorithm therefore meets real-time efficiency and precision requirements, it is suitable for use with semiconductor devices. Note to Practitioners-Because deviation appears when a wafer is first put on the working table, the traditional process is to set up a prealignment system when aligning a new type of wafer. However, different templates increase difficulty for machine operators, and decrease automation and reliability of the devices. This paper therefore proposes a new general prealignment algorithm based on using Fourier transform for orientation prealignment and least square regression for position prealignment. The algorithm was tested on two types of wafer with results showing that the orientation prealignment achieved an accuracy of 0.05 degrees, the position prealignment achieved an accuracy of 5 pixels, and the average operation time was about 1.5 s, all of which meet real-time requirements. Although the algorithm can be adapted to different wafers without adjustment, it does not fit nonquadrilateral chips very well. Accordingly, we will develop an improved algorithm with better generality in due course.

Wafer Pre-Aligning Method Based on High-Precision Digital Micrometer

Research on Wafer Pre-alignment System

A Wafer Prealignment Algorithm Based on Fourier Transform and Least Square Regression

Design and Experiment of the Wafer Pre-Alignment System

A method of precise orientation of wafer prealignment

High-precision laser alignment technique based on spiral phase plate

The Development of a Wafer Prealigner Based on the Multi‐sensor Integration

A robust algorithm for rapid pre-alignment of multiple types and sizes of wafers

New Wafer Prealigner Based on Multi-Sensor Fusion

Control System for Wafer Transport Device Based on High-precision Prealigner

Alignment Methods for Micron-Scale Surface Defects Automatic Evaluation of Large-Aperture Fine Optics

Optimization of Longitudinal Alignment of an 4<i>f</i> System in a Compact Vectorial Optical-Field Generator Based on a High-Resolution Liquid Crystal Spatial Light Modulator

A nano-scale alignment method for imprint lithography

Misalignment Correction for Free-Form Surface in Non-Null Interferometric Testing

A High-Precision Mark Positioning Algorithm Based on Sub-Pixel Shape Template Matching in Wafer Bonding Alignment

Wafer Prealigning Robot Based on Shape Center Calculation

High-Precision Alignment for Low-Temperature Wafer Bonding

Design of A Fine Alignment System Featuring Active Orientation Adjustment for Nano Imprint Lithography

A novel moiré fringe assisted method for nanoprecision alignment in wafer bonding

Moire-Based Alignment Using Centrosymmetric Grating Marks For High-Precision Wafer Bonding

Alignment Mechanism of Nikon Step and Repeat Machine