Abstract:Automatic wafer prealignment is an important process in wafer manufacturing, whereby its flat edge is set at a predefined angle and its center is set in a predefined position; translational and rotational movement compensate for deviation of the wafer. However, as the traditional wafer prealignment algorithm depends on marked templates at the training stage when the type of wafer is changed, the templates need to be retrained. This paper proposes a new wafer prealignment algorithm, based on Fourier transform for orientation prealignment and least square regression for position prealignment, which will automatically adapt to different types of wafers in 2-D space. Results from experiments with the proposed algorithm on a laser-scribing machine using two types of wafer show that the orientation prealignment achieved an accuracy of 0.05 degrees, the position prealignment achieved an accuracy of 5 pixels, and the average operation time was approximately 1.5 s. As prealignment algorithm therefore meets real-time efficiency and precision requirements, it is suitable for use with semiconductor devices. Note to Practitioners-Because deviation appears when a wafer is first put on the working table, the traditional process is to set up a prealignment system when aligning a new type of wafer. However, different templates increase difficulty for machine operators, and decrease automation and reliability of the devices. This paper therefore proposes a new general prealignment algorithm based on using Fourier transform for orientation prealignment and least square regression for position prealignment. The algorithm was tested on two types of wafer with results showing that the orientation prealignment achieved an accuracy of 0.05 degrees, the position prealignment achieved an accuracy of 5 pixels, and the average operation time was about 1.5 s, all of which meet real-time requirements. Although the algorithm can be adapted to different wafers without adjustment, it does not fit nonquadrilateral chips very well. Accordingly, we will develop an improved algorithm with better generality in due course.

A Flip-Chip Alignment System With the Property of Deviation Self-Correction at the Nanoscale

High-precision laser alignment technique based on spiral phase plate

Alignment Methods for Micron-Scale Surface Defects Automatic Evaluation of Large-Aperture Fine Optics

A New Principle and Device for Large Aircraft Components Gaining Accurate Support by Ball Joint

Misalignment Correction for Free-Form Surface in Non-Null Interferometric Testing

Assembly Accuracy Analysis for Small Components with A Planar Surface in Large-Scale Metrology

A method of precise orientation of wafer prealignment

Design and Experiment of the Wafer Pre-Alignment System

The Development of a Wafer Prealigner Based on the Multi‐sensor Integration

Design of A Fine Alignment System Featuring Active Orientation Adjustment for Nano Imprint Lithography

A Wafer Prealignment Algorithm Based on Fourier Transform and Least Square Regression

New Wafer Prealigner Based on Multi-Sensor Fusion

A micro cutter auto-alignment system with on-machine positioning error measurement and compensation methods

A robust algorithm for rapid pre-alignment of multiple types and sizes of wafers

Automatic alignment system device of micro–nanofluid control chip and its application

Control System for Wafer Transport Device Based on High-precision Prealigner

Development and Error Compensation of Laser Soldering System

A novel moiré fringe assisted method for nanoprecision alignment in wafer bonding

High-precision compliant mechanism for lens XY micro-adjustment.

Wafer Pre-Aligning Method Based on High-Precision Digital Micrometer

A Novel Two-Step Alignment Technique for Imprint Lithography