Abstract:A novel three-phase four-wire inverter topology is presented in this paper. This topology is equipped with a special capacitor balance grid without magnetic saturation. In response to unbalanced load and unequal split DC-link capacitors problems, a qusi-full-bridge DC/DC topology is applied in the balance grid. By using a high-frequency transformer, the energy transfer within the two split dc-link capacitors is realized. The novel topology makes the voltage across two split dc-link capacitors balanced so that the neutral point voltage ripple is inhibited. Under the condition of a stable neutral point voltage, the three-phase four-wire inverter can be equivalent to three independent single phase inverters. As a result, the three-phase inverter can produce symmetrical voltage waves with an unbalanced load. To avoid forward transformer magnetic saturation, the voltages of the primary and secondary windings are controlled to reverse once during each switching period. Furthermore, an improved mode chosen operating principle for this novel topology is designed and analyzed in detail. The simulated results verified the feasibility of this topology and an experimental inverter has been built to test the power quality produced by this topology. Finally, simulation results verify that the novel topology can effectively improve the inhibition of an inverter with a three-phase unbalanced load while decreasing the value of the split capacitor.

3×4 matrix converter

Improvement of Matrix Converter's Topology and Study on It's Control Strategy under Unbalance Load

A novel operation strategy for single-to three-phase matrix converter

Common-Mode Voltage Reduction for Three-Phase-to-Four-Leg Direct Matrix Converter with a Novel Control Strategy

Closed-Loop Decoupled Control and Implementation of the Modular Multilevel Matrix Converter in Similar/Equal Frequency Operation

Soft-switching three-phase matrix based isolated AC-DC converter for DC distribution system

Improved Switching Function Modulation Strategy for Three-Phase to Single-Phase Matrix Converter

Research on the capacity of four-leg matrix converter with unbalanced load

Modulation Technique for a 3 x 5 Matrix Converter Achieving a Maximum Input Reactive Power Range Based on Load Information

Control of AC-capacitor clamped three & five level matrix converter using voltage & current modulation

Research on Carrier-based Modulation of Capacitor Clamped Three-Level Matrix Converter

Voltage Balancing in a 1-Level Modular Multilevel Matrix Converter

Matrix converters for electric power conversion: Review of topologies and basic control techniques

Analysis and Control of the Modular Multilevel Matrix Converter under Unbalanced Grid Conditions

Modeling and Triple-Loop Control of ZVS Grid-Connected DC/AC Converters for Three-Phase Balanced Microinverter Application

Three-Phase Four-Wire Inverter Topology with Neutral Point Voltage Stable Module for Unbalanced Load Inhibition

Research on Control Strategy of M3C Matrix Converter System

Research on space-vector modulation and common-mode voltage of four-leg matrix converter

Study of Unbalanced Circular Current Suppressing for Modular Multilevel Converter

Voltage Balancing Control of AC-capacitor Clamped Multi-Level Matrix Converter Based on Optimal Switching Status Selection

Control of Modular Multilevel Converter Based on Stationary Frame under Unbalanced AC System