Abstract:This paper studies control strategies for an AC/AC system based on a modular multilevel matrix converter (M3C) when an asymmetric fault occurs in the secondary side ac system. Firstly, the operating principle of M3C is briefly introduced and verified by simulation. Then, based on its mathematical model by double αβ0 transformation, the decoupled control strategies for the primary side and secondary side systems are designed. In view of the asymmetric fault condition of the secondary side system, the positive sequence and negative sequence components of voltages and currents are separated and extracted, and then a proportional resonant controller (PR) is used to regulate the positive and negative sequence currents at the same time to realize decoupled current control in the αβ reference frames. The capacitor voltage balancing control, which consists of an inter-subconverter balancing control and an inner-subconverter balancing control, is realized by adjusting four circulating currents. Finally, the proposed control strategy is validated by simulation in the PSCAD/EMTDC software (Manitoba HVDC Research Center, Canada). The result shows that during the period of the BC-phase short-circuit fault occurring in the secondary side system, the whole system can still operate stably and transmit a certain amount of active power, according to their set values. Furthermore, the capacitor voltages are balanced, with a slight increase during the fault period. The simulation results verify the effectiveness of the proposed control strategy.

Analysis and Control of the Modular Multilevel Matrix Converter under Unbalanced Grid Conditions

Closed-Loop Decoupled Control and Implementation of the Modular Multilevel Matrix Converter in Similar/Equal Frequency Operation

Analysis and Control of Modular Multilevel Converters Under Unbalanced Conditions

Modeling and Control of Modular Multilevel Matrix Converter for Low-Frequency AC Transmission

Distributed Control for the Modular Multilevel Matrix Converter

Research on Modeling and Control Strategy of Modular Multilevel Matrix Converter Supplying Passive Networks

Control of Modular Multilevel Converter Based on Stationary Frame under Unbalanced AC System

Research on Control Strategy of M3C Matrix Converter System

Design and implementation of a distributed control structure for modular multilevel matrix converter

Research on an Asymmetric Fault Control Strategy for an AC/AC System Based on a Modular Multilevel Matrix Converter

Study of Unbalanced Circular Current Suppressing for Modular Multilevel Converter

Design and Control of Modular Multilevel Matrix Converter with Symmetrically Integrated Energy Storage for Low Frequency AC System

Research on Modeling and Control Strategy of Modular Multilevel Matrix Converter Based on Double Dq Coordinate Transformation

A Control System for Large-Scale Modular Multilevel Converters.

Optimal Arm Current Reallocation of Modular Multilevel Matrix Converter Dedicated for Power Grid Interconnection

Analysis and Control of Modular Multilevel Matrix Converters under Branch Fault Conditions

Control of Modular Multilevel Converter Under Imbalance of AC Power System

Hierarchical Model Predictive Control Of Modular Multilevel Matrix Converter For Low Frequency Ac Transmission

An Optimal Full Frequency Control Strategy for the Modular Multilevel Matrix Converter Based on Predictive Control

Arm Voltage Balance Control of a Modular Multilevel Matrix Converter with Inner and Outer Loop Double Adjustment Based on Circulating Current

A Branch Current Reallocation Based Energy Balancing Strategy for the Modular Multilevel Matrix Converter Operating Around Equal Frequency