Abstract:This paper reports a numerical method for the design of a unrunning blade with the consideration of both nonlinear aerodynamic and centrifugal forces. Accurate prediction of blade manufacture shape in turbomachinery is crucial for performance, efficiency and aeroelastic stability. An iterative procedure starting from a given blade running shape is developed to predict the manufacture blade shape. The model is based on a three-dimensional (3D) unsteady nonlinear Navier-Stokes Computational Fluid Dynamics (CFD) solver and the mode superposition structural dynamic theory in conjunction with a finite element structural model for the rotor blade. The manufacture profile of the blade (“Cold” blade) is estimated from the running blade shape (“Hot” blade). ANSYS finite element code is used to compute the deflection of the cold blade due to centrifugal loads. A finite volume based 3D nonlinear CFD code, coupled with a mode superposition structural dynamic modal method, is employed to determine the blade deflection due to unsteady aerodynamic loading. The difference between the computed blade profile and the targeted hot blade shape is used to predict a new cold blade for the next iteration if the convergence criterion is not met. The method is applied to predict the manufacture blade shape of a large-scale propfan and a NASA rotor 67 fan. The predicted blade profile and the twist angle of the blade at various spans are presented. The results show that improvements of the manufacture blade profile can be made by including proper nonlinear aerodynamic effect on the blade deflection in the numerical model. The results also illustrate that aerodynamic nonlinear effects on structural deformation should be included for a better cold blade design.

Numerical method for fluid-structure interaction in turbomachinery bladings

Static Aeroelasticity Analysis of a Rotor Blade Using a Gauss-Seidel Fluid-Structure Interaction Method

Aeroelastic Stabilities Analysis of a Transonic Fan Rotor NASA Rotor67

Numerical Simulation of Aeroelastic Response in Compressor Based on Fluid-Structure Coupling

Fem Simulation Of Turbulent Flow In A Turbine Blade Passage With Dynamical Fluid-Structure Interaction

Application of FSI on Turbomachinery

Study on Numerical Simulation of Internal Flow Field for the Multi Blade Centrifugal Fan

Numerical Simulation Method for the Aeroelasticity of Flexible Wind Turbine Blades under Standstill Conditions

Unsteady Interacting Flow Analysis of Ducted Propeller Based on CFD Method

Coupled Fluid-structure Aeroelastic Analysis of Turbomachinery Using Conservative Data Transfer Algorithm

Numerical simulation of unsteady rotor/stator interaction in turbomachinery

Evaluation of Various Numerical Methods for Blade Row Interaction in Turbomachinery

VISCOUS THREE-DIMENSIONAL FLOW SOLVERS USED IN MULTISTAGE TURBINE

Investigations on Unsteady Flow Excitation and Mechanical Performance of Last Turbine Stage Long Blade Using Fluid-Structure Interaction Method

C207 applications of higher-order accurate computational fluid dynamic method to steam turbine blade designs

NUMERICAL INVESTIGATIONS OF THE LONG BLADE PERFORMANCE USING RANS SOLUTION AND FEA METHOD COUPLED WITH ONE-WAY AND TWO-WAY FLUID-STRUCTURE INTERACTION MODELS

Modal Analysis of Francis Turbine Blade Based on Fluid-Structure Interaction Theorem

A Fluid-Structure Coupling Method for Rotor Blade Unrunning Design

Numerical Investigations on the Blade Tip Clearance Excitation Forces in an Unshrouded Turbine

ANALYSIS OF FLOW-INDUCED VIBRATION OF BLADES FOR A FRANCIS HYDRO TURBINE

Preliminary Aeroelastic Stability Design for Heavy Duty Gas Turbine Compressor Blade