Abstract:Summary form only given. Experiments of DBD in a 2-mm air gap were performed. When fine wire mesh electrodes covered with 0.1 mm PET film and 50 Hz AC power source were used, the breakdown voltage of the gap is 6.4 kV, about 1.3 W lower than that using plate electrodes covered with 1 mm quartz plate. The discharge using the mesh electrodes covered by PET film looks more uniform than that using plate electrodes covered by quartz plate. Even when a uniform discharge was observed, multipulses of discharge current in the half cycle of the applied voltage were recorded, which indicates the discharge is filament discharge rather than glow discharge. When 50 Hz source is replaced by a high frequency source, the uniform discharge turns to strong filaments. It may be explained by the thermal instability. The reason for the mesh electrodes covered by PET film making discharge more uniform is still not fully understood. The calculations of the electric field in the gap show that the wire mesh electrodes couldn't enhance much the gap field close to the PET film when the film is thicker than 0.05 mm. In helium APGD experiments with one electrode uncovered by dielectric it was found that discharge current peak is higher and breakdown voltage of the gap is lower in the half voltage cycle when the uncovered electrode was operated as cathode. It seems not to be closely related to the second electron emission from the uncovered cathode since no much differences were found when the uncovered electrode of stainless steel was replaced by an aluminium one

Effects of Discharge Gap on Dielectric Barrier Discharge Parameters

Notice of RetractionMeasuring DBD Main Discharge Parameters Using Q-V Lissajous Figures

Electrical Modeling of Dielectric Barrier Discharge Considering Surface Charge on the Plasma Modified Material

Similarity Study of Micro-Gap Dielectric Barrier Discharge by Numerical Simulation

Study on Influential Factors of Dielectric Barrier Discharge in Air

Influence of rotating dielectric barrier on discharge characteristics in multi‐needle‐plate DBD

Comparison of the Surface Dielectric Barrier Discharge Characteristics under Different Electrode Gaps

Transition from Glow-Like to Streamer-Like Discharge in Atmospheric Pressure Dielectric Barrier Discharge Controlled by Variable Dielectric Surface Layer Permittivity

Study of Characteristics of Coplanar Dielectric Barrier Discharge

Effect Of Surface Charge Trapping On Dielectric Barrier Discharge

Mechanical Characteristics of Dielectric Barrier Discharge Plasma

Influence of Dielectric and Electrode on DBD at Atmospheric Pressure

Investigation of Surface Charge Distribution and Its Influence on Characteristics of Dielectric Barrier Discharge

A non‐equal gap distance dielectric barrier discharge: Between cone‐shape and cylinder‐shape electrodes

Study on A Packed Bed Dielectric Barrier Discharge Plasma Reactor

Direct Current Dielectric Barrier Assistant Discharge to Get Homogeneous Plasma in Capacitive Coupled Discharge

Influence of Gap Distance on BD Characteristics of Sphere-plane Electrodes in Vacuum under Constant Electric Field Strength at Cathode

Effects of Dielectric Barriers in Radio-Frequency Atmospheric Glow Discharges

Effect of Nano- to Millisecond Pulse on Dielectric Barrier Discharges

Experimental Research on Microdischarge Characteristics of DBD

Simulation Analysis on Dielectric Barrier Glow Discharge in Short Ar Gap under Atmospheric Pressure