Abstract:It is believed that the maximum spacing for generating a uniform non-equilibrium plasma in atmospheric pressure air is 4 mm. In this paper, we propose a new type of DBD discharge structure to address this challenge. The left end of the structure rapidly increases the discharge spacing from 0.5 mm to 6 mm, while the right side of the main discharge gap maintains a uniform spacing of 6 mm. Nanosecond pulse voltage is used to drive the plasma, an ICCD camera is used to capture the image of the plasma during a discharge pulse cycle, which indicates that a uniform plasma within the 6mm spacing of the main discharge gap is generated. Upon further reducing the ICCD camera's exposure time to 20 ns, it is revealed that the uniform plasma is formed due to the rapid propagation of the plasma from left to right at a speed of order of 105 m/s. Due to the small transverse component of the external electric field, this rapid propagation behavior cannot be due to the external electric field. Therefore, this paper further proposes the hypothesis of electric dipole formation leading to this fast propagation. The hypothesis suggests that the charge separation on the surface of the anode forms an electric dipole, which generates a local discharge at its right end. This local discharge further triggers the discharge in the main gap, and the main gap discharge, in turn, forms a dipole due to charge separation again, by repeating this cycle, the plasma propagates rapidly to the right. Further analysis demonstrates that this dipole can indeed produce a strong electric field of up to 41 kV/cm at its right end, which is sufficient to induce a local discharge. Moreover, under such a strong electric field, the electron migration rate can indeed reach 105 m/s.

Mechanical Characteristics of Dielectric Barrier Discharge Plasma

Electrical Modeling of Dielectric Barrier Discharge Considering Surface Charge on the Plasma Modified Material

Study of Characteristics of Coplanar Dielectric Barrier Discharge

Numerical simulation of air DBD under standard atmospheric pressure

Comparison of Experiment and Simulation on Dielectric Barrier Discharge Driven by 50hz AC Power in Atmospheric Air

The effect of air plasma on barrier dielectric surface in dielectric barrier discharge

Simulation Study on the Mechanism of Wire– Cylinder Air Dielectric Barrier Discharge Under Atmospheric Pressure

Study of Homogeneous DBD with Fine Wire Meshes and PET Films in Air at Atmospheric Pressure

Experimental Research on Microdischarge Characteristics of DBD

Influence of Dielectric and Electrode on DBD at Atmospheric Pressure

Realization of meter-scale and high-density of charged particles by surface dielectric barrier discharge

Influence of rotating dielectric barrier on discharge characteristics in multi‐needle‐plate DBD

Experimental Investigation into Characteristics of Plasma Aerodynamic Actuation Generated by Dielectric Barrier Discharge

Static Electric Field Intensity Calculation of Two Kinds of Electrode Structure Plasma Generator

Homogeneous Dielectric Barrier Discharges in Atmospheric Air and Its Influencing Factor

Atmospheric pressure uniform dielectric barrier discharge (DBD) in a wide air gap initiated from a narrow starting point

Characteristics of Nanosecond-pulse Dielectric Barrier Discharge in Atmospheric Air

Dielectric Barrier Discharge and Its Applications

Numerical Study on Positive Streamer in Parallel-Rod Dielectric Barrier Discharge in Atmospheric Air

DC-Augmented Dielectric Barrier Discharge (DCA-DBD)

Experimental Investigations of the Effect of Dielectric Barrier Discharge Plasma on Performance of Compressor Cascade