Abstract:We recently demonstrated that pseudoelastic NiTi tubes compressed axially buckle first into an axisymmetric wrinkling mode but subsequently collapse by progressive development of buckle lobes with three circumferential waves. This behavior is governed by the material nonlinearity associated with the austenite to martensite solid-state transformation. On unloading, the material transforms back to austenite, deformation is recovered, and the buckling lobes are erased (Jiang et al., 2016). The problem was simulated numerically using a constitutive model framework for the pseudoelastic behavior of NiTi based on a J2-type nonlinear kinematic hardening model with the back stress represented through a potential. The first generation of the model did not account for the significant tension/compression asymmetry exhibited by the material so the buckling response did not reproduce well the experiments underestimating the dissipated energy. In the present work the constitutive model is extended to include the tension/compression asymmetry. It is introduced through a weighted mix of two potentials that are calibrated to the tensile and compressive stress-strain responses of the material. In addition, the present model allows for plastic deformations at the completion of martensite transformation. Incorporation of the tension/compression asymmetry significantly improves the calculated response of the buckling and recovery of NiTi tubes both qualitatively and quantitatively. The addition of plastic deformations to the model further improves the predictions. The initial axisymmetric wrinkling and the switch to the buckling mode with three circumferential waves are now reproduced correctly, and so are the evolution of localized collapse and the recovery of deformation on unloading. Furthermore, the stress levels during collapse and recovery follow the experimental levels quite closely thus reproducing the energy dissipated.

Experimental Investigation on Dynamic Buckling of the TiNi Cylindrical Shell under Single Loading

Experimental Investigation on Buckling Behavior of a Thin Cylindrical Shell Made of Tini Alloy under Static Compression

Quasi-static axial buckling behavior of NiTi thin-walled cylindrical shells

Experimental investigation of axial impact buckling response of pseudo-elastic NiTi cylindrical shells

Phase Transformation Dynamic Buckling Behaviors of Pseudo-Elastic TiNi Shells under Axial Impact

Experimental Investigation on Radial Compression Characteristics of TiNi Cylindrical Shell

Dynamic Buckling Of Superelastic Sma Shells Under Axial Impact - Numerical Simulation

Buckling Test of Metallic Thin-Walled Cylindrical Shells under Non-Uniform Axial Compression Loads

Buckling and Unbuckling of Superelastic NiTi Tube

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Experimental Studies of Dynamic Behavior of TiNi Alloy Thin Circular Plate Subjected to Transversal Impact

Experimental and Numerical Study of the Superelastic Behaviour on NiTi Thin-Walled Tube under Biaxial Loading

Observation Of The Buckling Behavior Of Cylindrical Shells Under Transient Axial Impulsive Loading

Analytical Research on Dynamic Buckling of Thin Cylindrical Shells with Thickness Variation under Axial Pressure

Nonlocal Shear Deformable Shell Model for Thermal Postbuckling of Axially Compressed Double-Walled Carbon Nanotubes

Postbuckling behavior of CNT-reinforced composite cylindrical shell surrounded by an elastic medium and subjected to combined mechanical loads in thermal environments

Experimental Research on Dynamic Buckling of the Cylindrical Shell Subjected Axial Impact and the Analysis of the Stress Wave Effect

Experimental Study of Thin-Walled TiNi Tubes under Radial Quasi-Static Compression

Buckling behaviors of thin-walled cylindrical shells under localized axial compression loads, Part 1: Experimental study

Elastic-plastic dynamic buckling of cylindrical shells under combined loading

Buckling and Recovery of Niti Tubes under Axial Compression