Abstract:Pseudoelastic NiTi structural components have been shown to exhibit tension/compression asymmetry. Under tension, phase transformation induces localized strains of nearly 7% that spread under nearly constant stress, while under compression the transformation leads to hardening at significantly higher stress, the strain is smaller and grows homogeneously. Bending of tubes ovalizes their cross-section, a nonlinearity that reduces the bending rigidity and precipitates instabilities that can lead to collapse. This paper uses experiment and analysis to examine the interaction of these geometric nonlinearities with the complex material behavior of pseudoelastic NiTi tubes of moderate diameter-to-thickness ratios under bending. An experiment on a tube with a diameter-to-thickness ratio of 18.7 shows that transformation causes the nucleation of several dispersed high strain banded patterns of martensite on the tensioned side. The zone where the bands coalesce into intersecting diamonds undergoes excessive local ovalization causing buckling and collapse at a relatively low overall tube curvature. The bending experiment is simulated with a finite element model coupled with a custom constitutive model of pseudoelastic NiTi that allows for plastic deformation of the martensitic phase. The analysis reproduces the moment-end rotation response, and the nucleation and evolution of the high strain diamond shaped patterns. Zones that develop such patterns exhibit accelerated growth of ovalization that degrades the local bending rigidity. In the presence of small geometric imperfections this degradation evolves into a buckle in the form of diffuse local ovalization that precipitates collapse that can negate the recoverable property of NiTi. Parametric studies show that as the tube D/t increases, the interaction between the material and geometric nonlinearities becomes stronger making buckling more imperfection sensitive.

Experimental investigation of axial impact buckling response of pseudo-elastic NiTi cylindrical shells

Quasi-static axial buckling behavior of NiTi thin-walled cylindrical shells

Phase Transformation Dynamic Buckling Behaviors of Pseudo-Elastic TiNi Shells under Axial Impact

Experimental Investigation on Dynamic Buckling of the TiNi Cylindrical Shell under Single Loading

Experimental Investigation on Buckling Behavior of a Thin Cylindrical Shell Made of Tini Alloy under Static Compression

Dynamic Buckling Of Superelastic Sma Shells Under Axial Impact - Numerical Simulation

Response of TiNi Cylindrical Shells under Single Wave Pulse Loading

Radial impact responses of cylindrical shells with phase transformation

Experimental Investigation on Radial Compression Characteristics of TiNi Cylindrical Shell

Experimental Research on Dynamic Buckling of the Cylindrical Shell Subjected Axial Impact and the Analysis of the Stress Wave Effect

Buckling Test of Metallic Thin-Walled Cylindrical Shells under Non-Uniform Axial Compression Loads

Experimental Study of the Dynamic Structural Response Ofpseudo-Elastic Ti-Ni Alloy Rectangular Cantilever Beamupon a Transversal Impact

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Experimental and FEM Analysis of the Fracture Behavior in NiTi Shape Memory Alloys

Experimental Studies of Dynamic Behavior of TiNi Alloy Thin Circular Plate Subjected to Transversal Impact

Dynamic response of cylindrical shell supporting structure under multiple impacts: experimental and numerical investigation

Finite Element Analysis of Pseudoelastic Behavior of Niti Shape Memory Alloy with Thin-Wall Tube under Extension-Torsion Loading

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Buckling and Collapse of Pseudoelastic NiTi Tubes under Bending

Buckling and Unbuckling of Superelastic NiTi Tube

Numerical Simulation of the Quasi-Static Axial Compression of the Pseudo-Elastic Phase Transformation Cylindrical Shells